"Keyless" releases
-
- *
- Posts: 30
- Joined: 16 Sep 2006, 20:53
Anna fixed it for me. For everyone out there the link above should now work if not this will for sure
http://forum.boundanna.com/forum-images ... elease.gif
http://forum.boundanna.com/forum-images ... elease.gif
Try this link, darling.curious_sb wrote:I tried to get your url to work, but there are spaces in it, which is why it is failing.
http://www.watchthemplay.com/bound/Keyl ... elease.bmp
Addition: I should have checked out the second page. At least it's available. Yum!
From the World of Anastasia
Darlings, bondage is so yummy!
Darlings, bondage is so yummy!
Back to the device itself...
It's pretty neat and simple. My only slight gripe is that I might be able / tempted to unscrew the cap. I guess there are ways round this. Adding a locking pin through the sides of the cap / tube or feeding the rope / chain through another smaller pipe so my hand can't reach the cap.
I'm guessing you can make these things out of standard 32mm waste pipe and cap ends.
It's pretty neat and simple. My only slight gripe is that I might be able / tempted to unscrew the cap. I guess there are ways round this. Adding a locking pin through the sides of the cap / tube or feeding the rope / chain through another smaller pipe so my hand can't reach the cap.
I'm guessing you can make these things out of standard 32mm waste pipe and cap ends.
-
- *
- Posts: 30
- Joined: 16 Sep 2006, 20:53
You have to remember if you screw it on tight with both hands and tie yourself up so you only have one hand. trying to unscrew something with one hand thats been tightened with both hands is almost impossible to get undone. I haven't been able to.neo wrote:Back to the device itself...
It's pretty neat and simple. My only slight gripe is that I might be able / tempted to unscrew the cap. I guess there are ways round this. Adding a locking pin through the sides of the cap / tube or feeding the rope / chain through another smaller pipe so my hand can't reach the cap.
I'm guessing you can make these things out of standard 32mm waste pipe and cap ends.
Keyless Release
http://www.amazon.com/Summit-Products-I ... B0001M80WW
http://www.amazon.com/Smart-Lab-Double- ... 44-1004409
http://www.amazon.com/Lrg-Steel-Safe-W- ... 44-1004409
Check out the above links. They are kids' toys but could work for our purposes.
Also, has everyone seen the purpose built ice-container with eye bolts?:
http://www.extremerestraints.com/self-b ... _1457.html
It looks very well machined judging by the picture, but $194???? Come on!
I should think that one of us ought to be able to build something just as reliable and effective for a lot less money.
Any takers?
http://www.amazon.com/Smart-Lab-Double- ... 44-1004409
http://www.amazon.com/Lrg-Steel-Safe-W- ... 44-1004409
Check out the above links. They are kids' toys but could work for our purposes.
Also, has everyone seen the purpose built ice-container with eye bolts?:
http://www.extremerestraints.com/self-b ... _1457.html
It looks very well machined judging by the picture, but $194???? Come on!
I should think that one of us ought to be able to build something just as reliable and effective for a lot less money.
Any takers?
To all:
I am trying to duplicate this device:
http://www.extremerestraints.com/self-b ... _1457.html
I want to do it cheaply.
So far, I have a 3/4" x 3" pvc pipe nipple and two, 3/4" threaded caps as well as two, 1/4" x 1-1/4" cotter pins.
As it stands now, I drilled 7/32" holes in the pvc caps and pushed the cotter pins into the holes and then screwed the caps onto each end of the nipple. The only problem is that the water leaks out of the holes in the caps. SO, I need a way to seal the holes in the caps while still being able to remove at least one cotter pin in order to fill the pipe with water. And also, of course you have to slide at least one cotter pin out to get free.
I will probably hit Home Depot this weekend and try to find rubber grommets to seal the caps. Or, maybe I will try screw eyes.
Anyway, does anyone have a better idea? If a reliable method for getting the water in without it leaking out before it can be put in the freezer can be found, this is a really cheap alternative to the expensive device shown in the url above.
Obviously, once the seal around the cotter pin or screw-eye is devised succesfully, the caps themselves could be glued in place to prevent the bindee from simply unscrewing them.
Anyway, if anyone can come up with a cheap solution to sealing the caps that doesn't require them to be laboriously sealed every time it's used, I would like to hear it.
I am trying to duplicate this device:
http://www.extremerestraints.com/self-b ... _1457.html
I want to do it cheaply.
So far, I have a 3/4" x 3" pvc pipe nipple and two, 3/4" threaded caps as well as two, 1/4" x 1-1/4" cotter pins.
As it stands now, I drilled 7/32" holes in the pvc caps and pushed the cotter pins into the holes and then screwed the caps onto each end of the nipple. The only problem is that the water leaks out of the holes in the caps. SO, I need a way to seal the holes in the caps while still being able to remove at least one cotter pin in order to fill the pipe with water. And also, of course you have to slide at least one cotter pin out to get free.
I will probably hit Home Depot this weekend and try to find rubber grommets to seal the caps. Or, maybe I will try screw eyes.
Anyway, does anyone have a better idea? If a reliable method for getting the water in without it leaking out before it can be put in the freezer can be found, this is a really cheap alternative to the expensive device shown in the url above.
Obviously, once the seal around the cotter pin or screw-eye is devised succesfully, the caps themselves could be glued in place to prevent the bindee from simply unscrewing them.
Anyway, if anyone can come up with a cheap solution to sealing the caps that doesn't require them to be laboriously sealed every time it's used, I would like to hear it.
I like to use a clock to do my timed release, I use all steel restraints so the release is critical, but I always use ice release as a backup, and its saved my ass more than once.
Sin
Sin
If your not playing on the edge, your taking up to much space...............................
Play safe and have fun...Now Where did I put that damn Key!!!!!
CINDY123@BAK.RR.COM
Play safe and have fun...Now Where did I put that damn Key!!!!!
CINDY123@BAK.RR.COM
Ice Lock from another supplier
That lock from Extreme Restraints is also available from www.meo-team.com
I have two of them and they work perfectly !!!
I have two of them and they work perfectly !!!