Low cost easy to hide sex machine
Posted: 23 Mar 2022, 10:25
So i always wanted to experiance a fucking machine but they are so expensive and im always afraid someone might find it.
Then the other day i was working with my drill and it hit me like a brick, why not use the drill to power a device.
Im not talking about using the drill motor but making a small device to wich i can attach the drill where you would normally find the drilbit.
Also this only works if your drill is speed adustable, most new ones and mine work in a sense the further you squeeze the trigger the faster it goes, so just use tape to keep it at a favorable speed.
The device is pretty simple, just take a rod bend it 90 degrees and depending on how deep the thrust must be another 90 bend in the opposite direction so it looks like a stretched 'Z' just attach something thats long enough and has a round tip over one part of the rod and put the other in the drill.
I just used cable ties to secure the drill to a wicker chair and for the round tip pice i used a spanner. Onto the spanner i attached a rod with help of cable ties and tape and onto that the dildo.
The rod i used was screw rod so to make sure the spanner stayed in place it was basically just some nuts with 2 washers on each side.
Easily assembled and de assembled and nobody is gonna ask why do you have a drill.
Then the other day i was working with my drill and it hit me like a brick, why not use the drill to power a device.
Im not talking about using the drill motor but making a small device to wich i can attach the drill where you would normally find the drilbit.
Also this only works if your drill is speed adustable, most new ones and mine work in a sense the further you squeeze the trigger the faster it goes, so just use tape to keep it at a favorable speed.
The device is pretty simple, just take a rod bend it 90 degrees and depending on how deep the thrust must be another 90 bend in the opposite direction so it looks like a stretched 'Z' just attach something thats long enough and has a round tip over one part of the rod and put the other in the drill.
I just used cable ties to secure the drill to a wicker chair and for the round tip pice i used a spanner. Onto the spanner i attached a rod with help of cable ties and tape and onto that the dildo.
The rod i used was screw rod so to make sure the spanner stayed in place it was basically just some nuts with 2 washers on each side.
Easily assembled and de assembled and nobody is gonna ask why do you have a drill.