this is a 3D printed prototype to prevent clover-clamps from being removed...
With one lock, it might still be possible using tools, but with a 2nd lock on the other side, the handle is held open and tools won't help...
the weight of the locks is another evil side-effect...
3D print: prevent removeal of clover-clamps
3D print: prevent removeal of clover-clamps
maid marta, Collared property of Domina Shelle Rivers and Lady Helena
https://twitter.com/ShellesPuppy
my blog: https://owned-by-princess-shelle.blogspot.com
my art: https://maid-marta.bdsmlr.com
https://twitter.com/ShellesPuppy
my blog: https://owned-by-princess-shelle.blogspot.com
my art: https://maid-marta.bdsmlr.com
Re: 3D print: prevent removeal of clover-clamps
I already used a lock to prevent the clamps from being opened again. However, this is version 2.0.occorics wrote:this is a 3D printed prototype to prevent clover-clamps from being removed...
With one lock, it might still be possible using tools, but with a 2nd lock on the other side, the handle is held open and tools won't help...
the weight of the locks is another evil side-effect...
With 2 locks you are assured of the necessary experience.
- bounddosster
- *****
- Posts: 2007
- Joined: 30 Jan 2014, 23:23
- Location: England. East of Midlands.
Re: 3D print: prevent removeal of clover-clamps
I also use a padlock to stop them from being removed by fitting it around the main pivoting piece under the finger grips where you squeeze to open them.kinbaku wrote:I already used a lock to prevent the clamps from being opened again. However, this is version 2.0.occorics wrote:this is a 3D printed prototype to prevent clover-clamps from being removed...
With one lock, it might still be possible using tools, but with a 2nd lock on the other side, the handle is held open and tools won't help...
the weight of the locks is another evil side-effect...
With 2 locks you are assured of the necessary experience.
I don't want to put a downer on it, great work and effort but if your going to use tools you could just cut the plastic away and squeeze it to release but the pulling and tugging by doing such an operation would result in some interesting sensations on the nipple.
That's my excuse and I'm sticking to it.
Re: 3D print: prevent removeal of clover-clamps
Yes, of course you can cut the plastic, although PLA is quite strong.bounddosster wrote:I also use a padlock to stop them from being removed by fitting it around the main pivoting piece under the finger grips where you squeeze to open them.kinbaku wrote:I already used a lock to prevent the clamps from being opened again. However, this is version 2.0.occorics wrote:this is a 3D printed prototype to prevent clover-clamps from being removed...
With one lock, it might still be possible using tools, but with a 2nd lock on the other side, the handle is held open and tools won't help...
the weight of the locks is another evil side-effect...
With 2 locks you are assured of the necessary experience.
I don't want to put a downer on it, great work and effort but if your going to use tools you could just cut the plastic away and squeeze it to release but the pulling and tugging by doing such an operation would result in some interesting sensations on the nipple.
I also found that it's possible to tilt the covers to the sides enough to reach the lower part of the clamp. It might be possible to use a lever there to open them enough to remove.
I'm now thinking about something like those metal chastity bras, but with a lockable hatch to be able to secure the clamps inside...
maid marta, Collared property of Domina Shelle Rivers and Lady Helena
https://twitter.com/ShellesPuppy
my blog: https://owned-by-princess-shelle.blogspot.com
my art: https://maid-marta.bdsmlr.com
https://twitter.com/ShellesPuppy
my blog: https://owned-by-princess-shelle.blogspot.com
my art: https://maid-marta.bdsmlr.com
Re: 3D print: prevent removeal of clover-clamps
Haha That is evil! can you link the .stl?
- Shannon SteelSlave
- Moderator
- Posts: 6622
- Joined: 03 Feb 2019, 19:49
- Location: New England, USA
Re: 3D print: prevent removeal of clover-clamps
Welcome to Bound Anna, VooKink
Bondage is like a foreign film without subtitles. Only through sharing and practice can we hope to understand.
A Jedi uses bondage for knowledge and defense, never for attack.
I am so smart! I am so smart! S-M-R-T!....I, I mean S-M-A-R-T!
A Jedi uses bondage for knowledge and defense, never for attack.
I am so smart! I am so smart! S-M-R-T!....I, I mean S-M-A-R-T!
Re: 3D print: prevent removeal of clover-clamps
Welcome to BoundAnna VooKink and enjoy the print when you get the .sti.
Re: 3D print: prevent removeal of clover-clamps
Here's an alternative I came up with ages ago.
I'd been making some spreader bars out of broom-handles, just cut to length then some heavy gauge screw eyelets, one in each end, perhaps one in the middle. A couple were cut about 15" (40cm approx). Have a loose lockable collar and cuffs, padlock one end of each bar to the collar, at the front, padlock the cuffs to the other ends, one on each. Now you can freely use your hands, but you can't get them anywhere near your face or chest (or genitals if you get the length right)
So just put the clamps on and any other tortures to other parts before you lock the cuffs to the bar ends.
You could also use chains and a couple of metal or rigid plastic tubes to replace the wooden bars.
I'd been making some spreader bars out of broom-handles, just cut to length then some heavy gauge screw eyelets, one in each end, perhaps one in the middle. A couple were cut about 15" (40cm approx). Have a loose lockable collar and cuffs, padlock one end of each bar to the collar, at the front, padlock the cuffs to the other ends, one on each. Now you can freely use your hands, but you can't get them anywhere near your face or chest (or genitals if you get the length right)
So just put the clamps on and any other tortures to other parts before you lock the cuffs to the bar ends.
You could also use chains and a couple of metal or rigid plastic tubes to replace the wooden bars.
be a switch, double the fun
Re: 3D print: prevent removeal of clover-clamps
i need to see if i still have it somewhere...VooKink wrote:Haha That is evil! can you link the .stl?
In the end, it didn't work as intended, i found an easy way out after a while and haven't found a way to improve the design yet...
maid marta, Collared property of Domina Shelle Rivers and Lady Helena
https://twitter.com/ShellesPuppy
my blog: https://owned-by-princess-shelle.blogspot.com
my art: https://maid-marta.bdsmlr.com
https://twitter.com/ShellesPuppy
my blog: https://owned-by-princess-shelle.blogspot.com
my art: https://maid-marta.bdsmlr.com