pic test

Test posting here if you are unsure how to do, posts here are deleted eventually. Nothing will break if you do something wrong.
User avatar
Gregovic
****
Posts: 1119
Joined: 26 Mar 2016, 21:31
Location: Netherlands

Re: pic test

Post by Gregovic »

lanad wrote:need more than cookies if my timing is correct,lol.
first take note of the outside temperature, currently -4.
not a good idea in winter time.
this device has a lot of potential and will be used a lot, once the weather becomes a lot warmer.
The problem with this idea is that the steel weight has a lot of thermal mass and is very goovoor at spreading the heat. Most likely it'll drop through the ice in minutes. This could be mitigated by putting a rubber pad or something on the bottom to insulate the weight from the ice.
How may I serve you? *Curtsey*
User avatar
lanad
*
Posts: 27
Joined: 04 Oct 2016, 19:26
Contact:

Re: pic test

Post by lanad »

I have thought that if there is a load pulling on the rope, it would hold the rod against the side and not allow it to slide down the tube. so it should be possible to extend the bondage longer, just the weight of the arm will hold the rod in place.
I must try this.
Post Reply