I've now created a v2 version of my selfbondage auto-increase 3 phases script.
It has a new link, because the old one also still exists. Just so you can use that one if you desire.
Link:
https://xtoys.app/scripts/sb-autoincV2
V2 adds the following:
The max is no longer a setting you must specify. It just takes the max of whatever you set to your channels. There is now proper support for dual channel estim. If you set one max higher than the other, they will increment at a similar pase. Channel A is always incrementing by 1, Channel B will either wait some steps and increment by 1 (if Channel B's max is lower (recommended)) or it will sometimes increment by 2 or even more if channel B's max is higher than channel A's max (only recommended if you really know what you're doing, and you want the jumps to go higher than 1 intensity.)
In addition, if phase 1 is set to just 1 second to increase, and the phase 1 intensity switch is set to a level of 40 or higher, it will automatically increase the phase one intensity by 5 instead of 1 until half of phase 1's phase is completed. From that point on, it will increment by just 1 intensity.
The idea behind this is that if you set the intensity to 40 or higher, you will not feel anything for the first half of the build up anyway, and going +5 is wanted in that case. I did not set it directly to half and build from there because someone may have set the phase 1 intensity wrong and then, this is a better alternative. Going from 0 to 20 is just 5 seconds rather than 20, so its a big time save. Especially if you want to start at say... 80. Then it will go up to 40 quickly and go 1 second afterwards for 40 seconds which is just 48 seconds to reach 80 instead of 80 seconds.
Formally known as Slave_L.
I'm not yet very comfortable expressing my love for kink from my private life. I will therefor hide behind my username KinkInSpace and not allow any connections to who I really am. I'm sure you'll understand.