Phoenix BJ Trainer V0.2 (SBBJT V0.2)

Selfbondage software and other kinky developments

Moderators: Riddle, Shannon SteelSlave

Re: Phoenix BJ Trainer V0.2 (SBBJT V0.2)

Postby substandard » 25 Jan 2022, 01:41

Thank you both! I sent Shannon a DM. Very excited to play around with this!
substandard
*
 
Posts: 2
Joined: 24 Jan 2022, 07:02

Re: Phoenix BJ Trainer V0.2 (SBBJT V0.2)

Postby kinbaku » 25 Jan 2022, 06:26

substandard wrote:I sent Shannon a DM.

I don't think you will regret it. Welcome to a new world. 8)
User avatar
kinbaku
*****
 
Posts: 3059
Joined: 10 Jan 2020, 19:26
Location: Belgium

Re: Phoenix BJ Trainer V0.2 (SBBJT V0.2)

Postby rio lorgsval » 10 Feb 2022, 03:19

Hello there. Sorry for the delay.
Sure. Still working on it but as soon as im done, i would love to share of course :)



substandard wrote:Hello, everyone!

I've been meaning to make something like this for a while, and found this program by chance in a Reddit comment when researching prior work. It looks like you've all done a wonderful job collaborating to make this, and I can't wait to use it. Should save me quite a bit of work too, as I was planning to buy one of those Edge TPU dev boards and use tensorflow, which would have taken forever. The approach here seems much more intelligent.

I am looking to set this up with a microcontroller so that I can make an independent device with it rather than needing to connect stuff to my desktop, and I also want to hook it up to other toys I have, like electromagnets for self-bondage, my PiShock, maybe even my Edge-o-Matic.

Obviously with this being built for Windows 10, I can't do that directly. I was hoping someone could share the source code so that I could make, and then of course share, a port of it that would run either on an Arduino or ARM-based systems like a Raspberry Pi. If anyone has it available and can share, that would be wonderful.

Thank you very much, and great work on this project!
rio lorgsval
*
 
Posts: 9
Joined: 29 Apr 2015, 00:48

Re: New SBBJT Idea - Light Sensors

Postby TyronD » 10 Feb 2022, 03:35

rio lorgsval wrote:So i had this idea but i'm not sure it's going to work. Pretty much, instead of using a camera which can be inaccurate at times, depending on its quality and the light, i was thinking about using light sensors. I would slice a Dildo horizontally, cut it in the middle and add 4 sensors (A,B,C,D) on one side and another 4 on the other side (E,F,G,H). "A" would be parallel to "E", "B" would be parallel to "F" etc. Those sensors would be glued slightly deeper than the surface of the didlo, so they are not exposed and eventually damage/scratch your throat etc. I would probably add a thin layer of nylon on top of each one so they dont get damaged from saliva etc.


Thought about something like that some time ago, but never found the time. Nice that you go this route and try to make it happen. I also ordered three dildos today to play around with it (and probably damage them :rofl: ). But my time is very limited so not sure when I will get to this project and contribute. But we'll see :) It would fix so many issues with the software right now, like light conditions, reflective skin, slightly moved dildo to the side when blowing, etc etc

All the best!
Tyron
TyronD
*
 
Posts: 16
Joined: 12 Jan 2021, 23:53

Re: Phoenix BJ Trainer V0.2 (SBBJT V0.2)

Postby Cummancs » 07 Apr 2022, 09:03

I tried the v0.31, but I can't set the dick regions so that the program perceives the deep throat. It alway fails. What's the problem? I tried previously an earlier version, that didn't show such errors.
Cummancs
*
 
Posts: 2
Joined: 07 Apr 2022, 09:00

Re: Phoenix BJ Trainer V0.2 (SBBJT V0.2)

Postby Shannon SteelSlave » 07 Apr 2022, 12:31

Welcome to Bound Anna, Cummancs.
Bondage is like a foreign film without subtitles. Only through sharing and practice can we hope to understand.
A Jedi uses bondage for knowledge and defense, never for attack.
I am so smart! I am so smart! S-M-R-T!....I, I mean S-M-A-R-T!
User avatar
Shannon SteelSlave
*****
 
Posts: 4465
Joined: 03 Feb 2019, 18:49
Location: New England, USA

Re: Phoenix BJ Trainer V0.2 (SBBJT V0.2)

Postby kinbaku » 07 Apr 2022, 17:44

Welcome Cummancs. Sorry I can't help you with this, but check back regularly - some members may only log in a few times a month, hopefully someone can help you with that.
User avatar
kinbaku
*****
 
Posts: 3059
Joined: 10 Jan 2020, 19:26
Location: Belgium

Re: Phoenix BJ Trainer V0.2 (SBBJT V0.2)

Postby Cummancs » 08 Apr 2022, 17:05

I'm really curious why the hell the program doesn't recognize deep throat. What and how should I set so that it work? I've read at a previous version that one has to set a direction of the suck the program to correctly handle the process. I can't find it in the ver. 0.31, did it get out from the program?
Cummancs
*
 
Posts: 2
Joined: 07 Apr 2022, 09:00

Re: Phoenix BJ Trainer V0.2 (SBBJT V0.2)

Postby Shannon SteelSlave » 08 Apr 2022, 22:09

Thanks for letting us know the problem.
Our Developers are unpaid volunteers who can help, when schedule permits.
This is not the first I have heard of problems with the newer versions.
Hope it all works out for you, sometime.
Bondage is like a foreign film without subtitles. Only through sharing and practice can we hope to understand.
A Jedi uses bondage for knowledge and defense, never for attack.
I am so smart! I am so smart! S-M-R-T!....I, I mean S-M-A-R-T!
User avatar
Shannon SteelSlave
*****
 
Posts: 4465
Joined: 03 Feb 2019, 18:49
Location: New England, USA

Previous

Return to Software

Who is online

Users browsing this forum: Google [Bot] and 2 guests