DIY Copper Breast Clamp

Ideas and instructions how you can make your own bondage toys.
User avatar
Karren
***
Posts: 334
Joined: 24 Jan 2021, 05:30

Re: DIY Copper Breast Clamp

Post by Karren »

New prototype all cut and mocked up, with a single threaded bolt in the middle (offset). Top and bottom are hinged about the same pipe located 7 inches outward. Need to adjust a few things and then solder it together. Thinking this would be awesome attached to a chair or something.
prototype.jpg
I reject your reality and substitute my own….......

My Kinky Photos —— https://ibb.co/album/n30dgX
User avatar
Karren
***
Posts: 334
Joined: 24 Jan 2021, 05:30

Re: DIY Copper Breast Clamp

Post by Karren »

Karren wrote:Then soldered on small terminals so I could attach my Tens unit (probably not powerful enough). Going to try it tonight.
Oh my…. does it work well. Way better than any number of Tens pads placed on the breasts. Sends waves through both breast, the entire length of the pipes. And this is running on an old single channel Omro tens unit.
I reject your reality and substitute my own….......

My Kinky Photos —— https://ibb.co/album/n30dgX
User avatar
kinbaku
*****
Posts: 5047
Joined: 10 Jan 2020, 20:26
Location: Belgium

Re: DIY Copper Breast Clamp

Post by kinbaku »

Karren wrote:Oh my…. does it work well. Way better than any number of Tens pads placed on the breasts. Sends waves through both breast, the entire length of the pipes. And this is running on an old single channel Omro tens unit.
I'm really glad my hint worked. :mrgreen:
I once applied it to an iron trestle that I used as an iron punishment horse. I also used a very old battery-operated TEN at the time.
User avatar
Karren
***
Posts: 334
Joined: 24 Jan 2021, 05:30

Re: DIY Copper Breast Clamp

Post by Karren »

New design ready for testing...
New Breast Clamp.jpg
I reject your reality and substitute my own….......

My Kinky Photos —— https://ibb.co/album/n30dgX
User avatar
scottk
*
Posts: 5
Joined: 30 Aug 2013, 23:01
Location: Washington, USA

Re: DIY Copper Breast Clamp

Post by scottk »

For attachment of the electrical leads to the bars, it maybe worth trying to attach the two leads at opposite ends. This has the benefit of creating pathways with equal resistance all long the clamp.

If you are already getting equal delivery to each breast then this is not needed.

Scott
User avatar
Dark_Lizerd
*****
Posts: 2416
Joined: 22 Oct 2006, 11:30
Location: New Mexico

Re: DIY Copper Breast Clamp

Post by Dark_Lizerd »

If you put a positive and a negative, even on opposite ends, you are still creating a short on the clamp.
But, you could put the negative on the clamp and the positive on the nipples.
All advice is checked, re-checked and verified to be questionable...
Don't ask, we both wont understand the answer...
http://www.mediafire.com/download/09dtr ... e_V2_2.exe Not just for nubies any more...
User avatar
ponylady
Moderator
Posts: 3822
Joined: 26 Dec 2007, 20:52
Location: germany
Contact:

Re: DIY Copper Breast Clamp

Post by ponylady »

You never cease to amaze me with your ingenuity, Karren.
[
Post Reply