New prototype all cut and mocked up, with a single threaded bolt in the middle (offset). Top and bottom are hinged about the same pipe located 7 inches outward. Need to adjust a few things and then solder it together. Thinking this would be awesome attached to a chair or something.
DIY Copper Breast Clamp
Re: DIY Copper Breast Clamp
Oh my…. does it work well. Way better than any number of Tens pads placed on the breasts. Sends waves through both breast, the entire length of the pipes. And this is running on an old single channel Omro tens unit.Karren wrote:Then soldered on small terminals so I could attach my Tens unit (probably not powerful enough). Going to try it tonight.
Re: DIY Copper Breast Clamp
I'm really glad my hint worked.Karren wrote:Oh my…. does it work well. Way better than any number of Tens pads placed on the breasts. Sends waves through both breast, the entire length of the pipes. And this is running on an old single channel Omro tens unit.
I once applied it to an iron trestle that I used as an iron punishment horse. I also used a very old battery-operated TEN at the time.
Re: DIY Copper Breast Clamp
New design ready for testing...
Re: DIY Copper Breast Clamp
For attachment of the electrical leads to the bars, it maybe worth trying to attach the two leads at opposite ends. This has the benefit of creating pathways with equal resistance all long the clamp.
If you are already getting equal delivery to each breast then this is not needed.
Scott
If you are already getting equal delivery to each breast then this is not needed.
Scott
- Dark_Lizerd
- *****
- Posts: 2418
- Joined: 22 Oct 2006, 11:30
- Location: New Mexico
Re: DIY Copper Breast Clamp
If you put a positive and a negative, even on opposite ends, you are still creating a short on the clamp.
But, you could put the negative on the clamp and the positive on the nipples.
But, you could put the negative on the clamp and the positive on the nipples.
All advice is checked, re-checked and verified to be questionable...
Don't ask, we both wont understand the answer...
http://www.mediafire.com/download/09dtr ... e_V2_2.exe Not just for nubies any more...
Don't ask, we both wont understand the answer...
http://www.mediafire.com/download/09dtr ... e_V2_2.exe Not just for nubies any more...