Magnetic Release for Safety Page 3

Ideas and instructions how you can make your own bondage toys.
Post Reply
SquareNot
*
Posts: 4
Joined: 04 Oct 2020, 22:44

Magnetic Release for Safety Page 3

Post by SquareNot »

Here are the final two pictures
Attachments
Picture 7  Drawing of System
Picture 7 Drawing of System
Picture 6 Timer
Picture 6 Timer
SquareNot
*
Posts: 4
Joined: 04 Oct 2020, 22:44

Re: Magnetic Release for Safety Page 3

Post by SquareNot »

I was asked how the chain fits between the wood blocks and the magnet and bracket. It depends on the size of chain of course. But here is a picture showing how it works.
Attachments
Hooking the Chain
Hooking the Chain
User avatar
kinbaku
*****
Posts: 5047
Joined: 10 Jan 2020, 20:26
Location: Belgium

Re: Magnetic Release for Safety Page 3

Post by kinbaku »

SquareNot wrote:I was asked how the chain fits between the wood blocks and the magnet and bracket. It depends on the size of chain of course. But here is a picture showing how it works.
Is hooking on the nail easy?
I would crimp the iron of the bar like an S-bend (the chain comes farthest from the bar in the bend) so that once behind the magnet, rotating the bar through 90° makes it easier to lift the chain higher than the cut nail.
Post Reply