3d printable cock cuff
- GeneralError
- **
- Posts: 141
- Joined: 16 Sep 2019, 15:30
- Location: Germany
3d printable cock cuff
I spent some more time practicing with Autocad Fusion360 and now proudly present a nice adjustable, lockable and 3d-printable cock cuff. I experimented with several measurements and found this version 5 quite good. It is strong enough to resist unauthorized removal and can be adjusted so tight that escape is not possible. Nevertheless it is pleasently wearable as my test during several hours prooved. If someone wants to test it, just print this: https://www.thingiverse.com/thing:4461594
My next plan is it to attach a shock collar device to the cuff, so that wearing it will be a bit more thrilling. I'm working on the design and printed a first prototype. I did a first try on which prooved the concept but a zap is not yet as inevitable as I expect it. But I'm confident to be able to fix this.
Cheers
General Error
General Error
Re: 3d printable cock cuff
Maybe an opening in the length of the block on which the shock collar lies. A zip tie can then be inserted into this to ensure good contact with the shock collar.GeneralError wrote:My next plan is it to attach a shock collar device to the cuff, so that wearing it will be a bit more thrilling. I'm working on the design and printed a first prototype. I did a first try on which prooved the concept but a zap is not yet as inevitable as I expect it. But I'm confident to be able to fix this.
- BoundInKasugai
- ***
- Posts: 352
- Joined: 19 Feb 2011, 06:28
Re: 3d printable cock cuff
Nice design!
- GeneralError
- **
- Posts: 141
- Joined: 16 Sep 2019, 15:30
- Location: Germany
Re: 3d printable cock cuff
Very nice design.
Are the shock collar contacts making good contact?
Are the shock collar contacts making good contact?
- GeneralError
- **
- Posts: 141
- Joined: 16 Sep 2019, 15:30
- Location: Germany
Re: 3d printable cock cuff
Definetely yes!kinbaku wrote:Very nice design.
Are the shock collar contacts making good contact?
However the skin should be slightly wet to support good contact. With dry skin I can endure 100% intensity without ouching, with wet skin 10% is already painful.
Re: 3d printable cock cuff
I use Rimba contactgel with my e-stim powerbox. It's waterbased, so it does not damage the devices. I've paid 7,95 EUR (8.91 USD) 250 ml (8,45 fluid oz).GeneralError wrote:However the skin should be slightly wet to support good contact. With dry skin I can endure 100% intensity without ouching, with wet skin 10% is already painful.
-
- **
- Posts: 149
- Joined: 07 Nov 2013, 03:23
Re: 3d printable cock cuff
Hmmm, what about making a cap on the top of the box frame that holds the shock collar, and then connect each contact to something like this https://www.mr-s-leather.com/sex-toys/e ... ectraloops.
With something like that you would all ways have contact and I am sure one heck of a kick when it shocks you. Heck could even use the one above plus https://www.mr-s-leather.com/sex-toys/e ... r-bi-polar and have a shock from head to base really easy.
Just some thoughts, but really like what you have going here!
With something like that you would all ways have contact and I am sure one heck of a kick when it shocks you. Heck could even use the one above plus https://www.mr-s-leather.com/sex-toys/e ... r-bi-polar and have a shock from head to base really easy.
Just some thoughts, but really like what you have going here!
Re: 3d printable cock cuff
can u post the stl again? its gone on thingiverse
- GeneralError
- **
- Posts: 141
- Joined: 16 Sep 2019, 15:30
- Location: Germany
Re: 3d printable cock cuff
I just checked the links above. They are working well. Maybe your account is configured to not display NSFW things?nikolaus wrote:can u post the stl again? its gone on thingiverse
Re: 3d printable cock cuff
I would like to put it to the test but I don't have a 3D printer and can't aford one. I do welcome a great challenge. I just might try it on and if I can't remove it ,I'll just wear it 24/7.GeneralError wrote:I spent some more time practicing with Autocad Fusion360 and now proudly present a nice adjustable, lockable and 3d-printable cock cuff. I experimented with several measurements and found this version 5 quite good. It is strong enough to resist unauthorized removal and can be adjusted so tight that escape is not possible. Nevertheless it is pleasently wearable as my test during several hours prooved. If someone wants to test it, just print this: https://www.thingiverse.com/thing:4461594 My next plan is it to attach a shock collar device to the cuff, so that wearing it will be a bit more thrilling. I'm working on the design and printed a first prototype. I did a first try on which prooved the concept but a zap is not yet as inevitable as I expect it. But I'm confident to be able to fix this. Cheers
General Error
Re: 3d printable cock cuff
I think nikolas is referring to the links to the plans on Thingverse for the printable item this thread was discussing (they now only return a 404 error) and not the two mr-s-leather.com ones in the post above.GeneralError wrote:I just checked the links above. They are working well. Maybe your account is configured to not display NSFW things?nikolaus wrote:can u post the stl again? its gone on thingiverse
- GeneralError
- **
- Posts: 141
- Joined: 16 Sep 2019, 15:30
- Location: Germany
Re: 3d printable cock cuff
I checked the thingiverse links again. They work well for me, when I'm logged in. Without beeing logged in or logged in with a different account the design objects are invisible. Thingiverse must have set them to invisible back in June without notfying me or giving me the chance to to publish them again. Very annoying
I created and published copies of the designs:
- Chastity Cuff V6 Ballzapper (2)
- Open Mouth Gag (2)
I created and published copies of the designs:
- Chastity Cuff V6 Ballzapper (2)
- Open Mouth Gag (2)