Magnetic Release for Safety Page 3

Ideas and instructions how you can make your own bondage toys.

Magnetic Release for Safety Page 3

Postby SquareNot » 04 Oct 2020, 21:30

Here are the final two pictures
Attachments
Picture 7 Drawing copy.jpg
Picture 7 Drawing of System
Picture 6 Timer copy.jpg
Picture 6 Timer
SquareNot
*
 
Posts: 4
Joined: 04 Oct 2020, 20:44

Re: Magnetic Release for Safety Page 3

Postby SquareNot » 18 Oct 2020, 01:32

I was asked how the chain fits between the wood blocks and the magnet and bracket. It depends on the size of chain of course. But here is a picture showing how it works.
Attachments
Hooking the Chain.jpg
Hooking the Chain
SquareNot
*
 
Posts: 4
Joined: 04 Oct 2020, 20:44

Re: Magnetic Release for Safety Page 3

Postby kinbaku » 18 Oct 2020, 12:40

SquareNot wrote:I was asked how the chain fits between the wood blocks and the magnet and bracket. It depends on the size of chain of course. But here is a picture showing how it works.

Is hooking on the nail easy?
I would crimp the iron of the bar like an S-bend (the chain comes farthest from the bar in the bend) so that once behind the magnet, rotating the bar through 90° makes it easier to lift the chain higher than the cut nail.
kinbaku
****
 
Posts: 641
Joined: 10 Jan 2020, 19:26
Location: Belgium


Return to DIY

Who is online

Users browsing this forum: No registered users and 7 guests