electromagnet time release

Ideas and instructions how you can make your own bondage toys.

Re: electromagnet time release

Postby TNTBound » 18 Sep 2022, 05:30

well fuck. i struggled a little too hard it seems and ripped the canvas a bit at the bottom right and top right where the belt loops attach....... :cry: i also got out because the zipper managed to slide down about 2 inches and i was able to grab the string with my teeth and get out after only an hour. so now i need to sew up the holes in this sleepsack, and i think the next thing to do, is to try a leather sleepsack and maybe that will be strong enough to be attached to the bed while i squirm about inside it....... the search continues for a sleepsack that i cant get out of for a decent amount of time....
For those that get it, no explanation is needed. For those that don't, no explanation is possible.
"Some men just want to watch the world burn" - i can relate to this more and more the older i get!
User avatar
TNTBound
****
 
Posts: 786
Joined: 09 May 2014, 16:24
Location: johnstown

Re: electromagnet time release

Postby TNTBound » 18 Sep 2022, 05:48

Shannon SteelSlave wrote:Too bad you don't live here. It would almost be bed time. And you could help me paint.


id bet im not too far away, living in the northeast and all. :wink:
For those that get it, no explanation is needed. For those that don't, no explanation is possible.
"Some men just want to watch the world burn" - i can relate to this more and more the older i get!
User avatar
TNTBound
****
 
Posts: 786
Joined: 09 May 2014, 16:24
Location: johnstown

Re: electromagnet time release

Postby Riddle » 18 Sep 2022, 07:38

It is a bummer that you tore your sleep sack already. Do you need something sturdier?

https://www.etsy.com/listing/783266458/ ... 1360633674
Take a look at the option and picture of the one with only a neck belt and zipper.
Resident timer maker. :hi:
Let’s make timers together!
User avatar
Riddle
****
 
Posts: 718
Joined: 24 Sep 2008, 06:37
Location: Oregon, USA

Re: electromagnet time release

Postby TNTBound » 18 Sep 2022, 15:40

Riddle wrote:It is a bummer that you tore your sleep sack already. Do you need something sturdier?

https://www.etsy.com/listing/783266458/ ... 1360633674
Take a look at the option and picture of the one with only a neck belt and zipper.


the one i have is from the straitjacket shop, exact same as that except mine is black.
For those that get it, no explanation is needed. For those that don't, no explanation is possible.
"Some men just want to watch the world burn" - i can relate to this more and more the older i get!
User avatar
TNTBound
****
 
Posts: 786
Joined: 09 May 2014, 16:24
Location: johnstown

Re: electromagnet time release

Postby Gregovic » 18 Sep 2022, 17:55

I'm a little surprised the sleepsack from the Straitjacketshop tore so easly, I would have thought it should have been sturdy enough to allow some struggeling. Perhaps you can add some belts around the sack and use those to secure to the bed? That should give some extra strength without putting strain on the sack itself.
How may I serve you? *Curtsey*
User avatar
Gregovic
****
 
Posts: 952
Joined: 26 Mar 2016, 20:31
Location: Netherlands

Re: electromagnet time release

Postby TNTBound » 18 Sep 2022, 19:13

Gregovic wrote:I'm a little surprised the sleepsack from the Straitjacketshop tore so easly, I would have thought it should have been sturdy enough to allow some struggeling. Perhaps you can add some belts around the sack and use those to secure to the bed? That should give some extra strength without putting strain on the sack itself.


that would be great if i had someone to put me into the sleepsack, but using it solo, having a belt at the shoulder height makes it impossible to get into by myself. and if i was somehow able to get into it like that, then it would be nearly impossible to get out of again. it might have been because the chains were pulling on an angle that caused it. i think it it were a straight pull sideways, it might not have happened.
For those that get it, no explanation is needed. For those that don't, no explanation is possible.
"Some men just want to watch the world burn" - i can relate to this more and more the older i get!
User avatar
TNTBound
****
 
Posts: 786
Joined: 09 May 2014, 16:24
Location: johnstown

Re: electromagnet time release

Postby Shannon SteelSlave » 18 Sep 2022, 22:55

Are we trying to get warranty service on this? Bondage equipment should allow for some struggling, even if sold as a "novelty". (In other words, not suitable for required restraint by the police or hospital) But certainly, the loom work and stitched anchors should be able to take some punishment. Maybe you can "trade" this defective one for a higher quality? Or, take your original paid price in $$ and go elsewhere.
Bondage is like a foreign film without subtitles. Only through sharing and practice can we hope to understand.
A Jedi uses bondage for knowledge and defense, never for attack.
I am so smart! I am so smart! S-M-R-T!....I, I mean S-M-A-R-T!
User avatar
Shannon SteelSlave
*****
 
Posts: 4877
Joined: 03 Feb 2019, 18:49
Location: New England, USA

Re: electromagnet time release

Postby TNTBound » 18 Sep 2022, 23:31

dont think it was defective, just not strong enough. it would have needed more supportive webbing stitched around the sack to hold up i think.
For those that get it, no explanation is needed. For those that don't, no explanation is possible.
"Some men just want to watch the world burn" - i can relate to this more and more the older i get!
User avatar
TNTBound
****
 
Posts: 786
Joined: 09 May 2014, 16:24
Location: johnstown

Re: electromagnet time release

Postby Sergio » 19 Sep 2022, 16:16

A lot of gear is only designed to take strain in the normal direction of use. My ex damaged a sleepsack in a similar way as she was putting me in it because for some reason she decided to pull outwards on one of the leather straps and tore the hoop from the sack as the hoop was only designed to keep the belt in place when struggling in the sack, not to hold it to the sack against an outward force.
Sergio
***
 
Posts: 219
Joined: 26 Mar 2016, 16:07
Location: UK, London

Previous

Return to DIY

Who is online

Users browsing this forum: No registered users and 3 guests