Using Self Locking Hinges

Ideas and instructions how you can make your own bondage toys.

Using Self Locking Hinges

Postby qman » 27 Dec 2021, 21:59

I have just created a few Ice Locks from combining ideas from the forums here out of PVC, etc. I may take some time to document the design and my various iterations in a later post. However, this got me wondering about how to best implement the ice locks along with ensuring I'm unable to reach any release systems until the ice melts and the lock opens. As I wondered, I thought about building a device that leverages self-locking hinges like those found here: https://www.aliexpress.com/item/1005003503730405.html.

My thought was to build something like a pole (wood or square aluminum stock that I would be able to reach the ceiling to secure a tie to when folded/collapsed (you could even leverage multiple smaller hinged sections, but as I either moved away or squat down the hinge would self-lock and prevent me from getting to the point i was secured until the ice lock melted. I thought that something this this could also be used for a spreader bar that would self-lock as well by just spreading my legs apart, etc. Once free via the ice lock, I would be able to reset the self-locking hinge to release anything else. I would even think that you could use something like this for a hogtie bar that locks rigid when unfolded.

Thoughts on the ideas, or other ideas for these type of locking hinges?
qman
*
 
Posts: 5
Joined: 27 Dec 2021, 21:38

Re: Using Self Locking Hinges

Postby Shannon SteelSlave » 28 Dec 2021, 00:41

Welcome to Bound Anna, Q.
Bondage is like a foreign film without subtitles. Only through sharing and practice can we hope to understand.
A Jedi uses bondage for knowledge and defense, never for attack.
I am so smart! I am so smart! S-M-R-T!....I, I mean S-M-A-R-T!
User avatar
Shannon SteelSlave
*****
 
Posts: 4432
Joined: 03 Feb 2019, 18:49
Location: New England, USA

Re: Using Self Locking Hinges

Postby kinbaku » 28 Dec 2021, 06:39

Welcome qman to BoundAnna.
I'm going to think about what is possible.
User avatar
kinbaku
*****
 
Posts: 3026
Joined: 10 Jan 2020, 19:26
Location: Belgium

Re: Using Self Locking Hinges

Postby kinbaku » 28 Dec 2021, 08:52

One possibility is with this construction that is attached to the ceiling.
SelfLockingHinges.jpg
SelfLockingHinges.jpg (13.42 KiB) Viewed 1174 times
One can simply attach the ice with the ring to which is the rope 2 that holds your bondage.
Once you pull rope 1 through the opening in the top red connection, the ice is lifted upwards, inaccessible to use your hands to make the ice melt faster. And the self-locking hinge ensures that you can safely exert some force on the ring: the lower red half can only go back down if you stand on a chair to release the hinge.
User avatar
kinbaku
*****
 
Posts: 3026
Joined: 10 Jan 2020, 19:26
Location: Belgium

Re: Using Self Locking Hinges

Postby qman » 28 Dec 2021, 11:28

I like the drawing and idea you provided in your reply, thank you. I was thinking of a less complex way of doing this so I drew up an image with a single rope. While standing, one could make all the secure connections and there would be some slack on the rope for doing this. I would envision some type of snap connector for cuffs or other connector at thye end. Once the person kneels down and the hinge locks in place and prevents access to the release or to stand up if fully rigid. A person would not be able to stand back up or release themselves until the ice lock releases them. Once that happens, you would be able to reach the hinge to reset it, etc. The release pin from the ice lock would be on the bottom so it could fit thought the eye screw hole, etc. This would need to be attached to the ceiling, but you could also attach to a wall or other object that the hinge would prevent access to in the locked position. Something that could force the body in an odd posture if needed.
Attachments
upload.jpg
qman
*
 
Posts: 5
Joined: 27 Dec 2021, 21:38

Re: Using Self Locking Hinges

Postby pavtron » 13 May 2022, 21:09

You could use a Rope Ratchet attached to the ground and the restraints.
Attachments
toTheFloor.jpg
User avatar
pavtron
**
 
Posts: 134
Joined: 19 Dec 2012, 21:38

Re: Using Self Locking Hinges

Postby pavtron » 13 May 2022, 21:13

Some other ideas...

Use one of these https://www.trivantage.com/locking-rail ... tem-284278

Just use the Rope Ratchet from the ice lock to the floor with a butterfly loop where you want the restraints.

Add a weight to the end of the free end. So if you move down you can't come back up.
Attachments
toTheFloor2.png
User avatar
pavtron
**
 
Posts: 134
Joined: 19 Dec 2012, 21:38


Return to DIY

Who is online

Users browsing this forum: No registered users and 5 guests