Electronic buttplug sensor program idea? ;)
Posted: 07 Jan 2015, 11:44
Buttplug program
For those of you tech - savvy people. .is this even possible? Hopefully everything I wrote makes sense..had to copy it from my processor. .! Let me know your thoughts! Essentially it's a plug with temperature sensors embedded, controlled by a time limit program...
1. The toy contains a temperature sensor to track whether or not it is holding at a certain temperature range.. (i.e...96.2 degrees to 99.0 degrees)
2. multiple temperature sensors are embedded in the toy to compare readings and make sure the
perameters that were pre-set before the session is activated are accurate and true
3. Sensors are deeply embedded and sealed, making the toy waterproof and durable
4. The program locks when activated, “internally” keeping track of the time that is pre-set, prior to Session Activation. When the time limit is reached; the session “Finishes” and unlocks, allowing for the user to change settings, and start a new Scene/training session.
5. Program settings allow for a certain amount of time per day that the temperature has to be maintained; allowing the user to have “free” time for bathroom use, etc. (I.e....in a 24 hr period, the user could set a “maintained temperature time of 23:00...giving themselves 1 hour of “freedom”
6. The user would have to keep track of their “free-time”; the chipboard will be able to log when plugged in if there was a discrepancy in the temperature range, thus notifying the program if the user failed to meet the program perameters that are set.
7. Programmable settings allow for a certain amount of hours and days until the end of the session, allowing the user to “train” themselves as little or as much as they like!
8. Offline capabilities; A chipboard records the time consistantly, and records whether the temperature is maintained or not maintained. The chipboard makes a record of the time that the temperature is outside the perameters and when the sensors fall back into the specified range.
9. Chipboard is programmed and “locked” to prevent time tampering which activates when the user starts a session; the Chipboard becomes re-programmable when the program finishes it's session.
10. Prior to starting a session, the user will have to upload information/photo/etc. To the Website/app/program as well as their social media information, so that there is incentive to successfully complete the session to it's defined perameters as set by the user.
11. As soon as the information/pictures/etc is loaded on to the website/program/app; the user will be asked if they wish to “proceed?” Once the user clicks YES, that information becomes locked until the session runs it's course.
12. The program will run autonomously on a local server (laptop, Phone) until the session is complete. It is up to the user to connect the chipboard hardware with the app or site that maintains their personal information.
13. The Chipboard has Micro-USB to connect and upload to keep track of daily time and whether or not it is met on a daily (24hr) basis.
14. The Chipboard HAS to communicate AT SOME POINT between the start and finish of the session; if no communication occurs before the finish, the program will automatically assume that the user failed to meet the parameters of the training session and upload the stored information that the user provided to the user provided social media.
15. Chipboard uploads to a program or app that automatically runs and interfaces with the chipboard to check and see if the user met their pre-set perameters of their current session.
16. The Program/Website/app will automatically check the chipboard so that if the requirements are not met; the user's information will be auto-uploaded- i.e....If the time perameter is not met; then as soon as the program has internet connection it uploads something embarassing to the internet for all the public to see!
17. When the current session is completed; the program “Unlocks”, allowing the user to adjust for future sessions. After the current session ends, the user can change settings accordingly. As before- when you click “OK” program “re-locks” until the next session is complete!
For those of you tech - savvy people. .is this even possible? Hopefully everything I wrote makes sense..had to copy it from my processor. .! Let me know your thoughts! Essentially it's a plug with temperature sensors embedded, controlled by a time limit program...
1. The toy contains a temperature sensor to track whether or not it is holding at a certain temperature range.. (i.e...96.2 degrees to 99.0 degrees)
2. multiple temperature sensors are embedded in the toy to compare readings and make sure the
perameters that were pre-set before the session is activated are accurate and true
3. Sensors are deeply embedded and sealed, making the toy waterproof and durable
4. The program locks when activated, “internally” keeping track of the time that is pre-set, prior to Session Activation. When the time limit is reached; the session “Finishes” and unlocks, allowing for the user to change settings, and start a new Scene/training session.
5. Program settings allow for a certain amount of time per day that the temperature has to be maintained; allowing the user to have “free” time for bathroom use, etc. (I.e....in a 24 hr period, the user could set a “maintained temperature time of 23:00...giving themselves 1 hour of “freedom”
6. The user would have to keep track of their “free-time”; the chipboard will be able to log when plugged in if there was a discrepancy in the temperature range, thus notifying the program if the user failed to meet the program perameters that are set.
7. Programmable settings allow for a certain amount of hours and days until the end of the session, allowing the user to “train” themselves as little or as much as they like!
8. Offline capabilities; A chipboard records the time consistantly, and records whether the temperature is maintained or not maintained. The chipboard makes a record of the time that the temperature is outside the perameters and when the sensors fall back into the specified range.
9. Chipboard is programmed and “locked” to prevent time tampering which activates when the user starts a session; the Chipboard becomes re-programmable when the program finishes it's session.
10. Prior to starting a session, the user will have to upload information/photo/etc. To the Website/app/program as well as their social media information, so that there is incentive to successfully complete the session to it's defined perameters as set by the user.
11. As soon as the information/pictures/etc is loaded on to the website/program/app; the user will be asked if they wish to “proceed?” Once the user clicks YES, that information becomes locked until the session runs it's course.
12. The program will run autonomously on a local server (laptop, Phone) until the session is complete. It is up to the user to connect the chipboard hardware with the app or site that maintains their personal information.
13. The Chipboard has Micro-USB to connect and upload to keep track of daily time and whether or not it is met on a daily (24hr) basis.
14. The Chipboard HAS to communicate AT SOME POINT between the start and finish of the session; if no communication occurs before the finish, the program will automatically assume that the user failed to meet the parameters of the training session and upload the stored information that the user provided to the user provided social media.
15. Chipboard uploads to a program or app that automatically runs and interfaces with the chipboard to check and see if the user met their pre-set perameters of their current session.
16. The Program/Website/app will automatically check the chipboard so that if the requirements are not met; the user's information will be auto-uploaded- i.e....If the time perameter is not met; then as soon as the program has internet connection it uploads something embarassing to the internet for all the public to see!
17. When the current session is completed; the program “Unlocks”, allowing the user to adjust for future sessions. After the current session ends, the user can change settings accordingly. As before- when you click “OK” program “re-locks” until the next session is complete!