I make things.

[Cdtush]

So During the winter I have a lot of time on my hands (seasonal Job) unless we have a lot of snow. and I started to look at the things that I would like to make. I started off simple. with just a ball gag.



And I just finished the first run at a Steel Collar. after taking this picture I have done a few mods to it.


I didnt like the Locking pin so I made a much larger one.


To make it a little more difficult to cut the pin or lock I added a shroud/ring. After all what good is a collar if it cant be attached to something.




so now that I have been playing with steel for a while. I desided to try a simple chastity belt.

[bound_jenny]

Nice work!

Jenny.

[Cdtush]

OK I got some more things to add to my list.







Now I have a complete set of steel manacles. Now I need Ideas. any one want to suggest something?

[bobbi]

one of these doggy style stockades.

http://dungeongear.net/DOGGY%20STOCKADE%201.jpg

i've always wanted one.

[heeled]

one of these doggy style stockades.

http://dungeongear.net/DOGGY%20STOCKADE%201.jpg

i've always wanted one.

Yeah, would love one of those aswell

[cdinbonds]

Three easy to make spreader bars and you have basically the same thing. If you need it to completely rigid,you can find a simple method to attach the "vertical" piece to the 2 "horizontal" pieces. The whole thing can be flat wood pieces for that matter. Simple straight cuts, and a few screws.

[cheap_sb]

Four actually, there's one that goes from the neck to the arm cross bar.

[lj]

Three easy to make spreader bars and you have basically the same thing. If you need it to completely rigid,you can find a simple method to attach the "vertical" piece to the 2 "horizontal" pieces. The whole thing can be flat wood pieces for that matter. Simple straight cuts, and a few screws.

just to add to that, I've made up several spreader bars from broom-handles and steel screw eyelets. All you need to do is cut them to whatever length you want, round off the cut ends, pilot-drill for the eyelets (otherwise the wood tends to split). If you put an eyelet in the centre of the bar, you can then link them to form a "T" or an "H", and spare eyelets can be used to attach things like clover clamps.

You can't achieve the rigidity of the stockade shown in the pic, but the immobility is pretty complete (having been on both ends of this set-up )

[Vickie]

I like the idea of using a jock cup as part of a chaste belt. My mind is reeling thinking of different ways to make one. Rope to start but leather later. The cup really makes it.

[Cindy123]

I like the fact you build most of you equipment, and it looks like it works like the pro built stuff, I buy most of my things on e-bay cheap, some things I had made.
since you know how to weld, you can make custom stuff for you.
Sin

[SusanSub]

I'm impressed. Can you make things out of stainless steel. or just regular steel?

[zackpower100]

u;u;i;;yhu;y

[Cdtush]

I havent tried stainless, cost Way Way to much, but I know that the welder can.

Making things to your own body is a great way to start making things.

I used the cup, first attempt was like 5 years ago, I used the coated cableing for dogs. they sell the connectors at the blue box and orange box store. and the cable. cheap.