my project this weekend, ankle/wrist stocks.
my project this weekend, ankle/wrist stocks.
I built a wrist/neck stocks a long time ago, they suck I should build new ones as I learned a lot of things about how to suck less at building things. But instead I am building a set of ankle/wrist stocks because I saw a picture today with it and wanted them so bad.
This is what I want:
And this is my progress so far:
I thought it was going to be easy to do in one afternoon, but the batteries in my drill are having a hard time with the huge hole saws. I got photos up of how I am building it so far and will continue to do so as I am able to finish it.
https://the.tiesthatbind.me/devices/ank ... cks-part-1
What do you all think?
This is what I want:
And this is my progress so far:
I thought it was going to be easy to do in one afternoon, but the batteries in my drill are having a hard time with the huge hole saws. I got photos up of how I am building it so far and will continue to do so as I am able to finish it.
https://the.tiesthatbind.me/devices/ank ... cks-part-1
What do you all think?
Re: my project this weekend, ankle/wrist stocks.
I think you should get a corded drill! Seriously, they have more power for those big hole saws (which really should be used in a drill press), and they never run out of power in the middle of a job. Cordless tools are great for small jobs, and in places where there is no mains power available, but you can't beat a corded tool in the workshop.
There's a fine line between cuddling and holding someone down so they can't get away.
The beatings will continue until morale improves.
Do not meddle in the affairs of dragons - for you are crunchy and good with ketchup.
The beatings will continue until morale improves.
Do not meddle in the affairs of dragons - for you are crunchy and good with ketchup.
Re: my project this weekend, ankle/wrist stocks.
Don't you live in an apartment? I'm curious what your toolbox and work area is like.
I'm sorta spoiled coming from a home that had a decent woodworking shop in the garage.
I'm sorta spoiled coming from a home that had a decent woodworking shop in the garage.
Re: my project this weekend, ankle/wrist stocks.
@cdinbonds
this morning i decided to cut two more leg holes to reduce weight and provide options, and i forgot to put the batteries on the charger. so that is exactly what i did, went and got a cordless drill.
@cheap_sb
i do most of the dusty/smelly things up on the patio, everything else just in the main room on an old furnature pad.
this morning i decided to cut two more leg holes to reduce weight and provide options, and i forgot to put the batteries on the charger. so that is exactly what i did, went and got a cordless drill.
@cheap_sb
i do most of the dusty/smelly things up on the patio, everything else just in the main room on an old furnature pad.
Re: my project this weekend, ankle/wrist stocks.
I finished the hard parts this morning.
I placed a padlock and flip latch near the wrists so that when the key falls they can be undone in self-bondage. The holes are still rough and sharp I plan to taper the holes. The foam padding is temporary too until I find better padding.
But now that it is this far I can test it to make sure it is worth continuing on (since i hate sanding lol)
I got more photos and the vidcap gallery from testing it up here here, https://the.tiesthatbind.me/devices/ank ... cks-part-2
I placed a padlock and flip latch near the wrists so that when the key falls they can be undone in self-bondage. The holes are still rough and sharp I plan to taper the holes. The foam padding is temporary too until I find better padding.
But now that it is this far I can test it to make sure it is worth continuing on (since i hate sanding lol)
I got more photos and the vidcap gallery from testing it up here here, https://the.tiesthatbind.me/devices/ank ... cks-part-2
Re: my project this weekend, ankle/wrist stocks.
Looks good.. I'm planning to be working with some MDF and a CNC-router for a little project of my own..
-
- **
- Posts: 177
- Joined: 20 Nov 2009, 00:03
Re: my project this weekend, ankle/wrist stocks.
you could use a router to quarter round the edges. Then go over with a dry sanding sponge, then use 220 grit and go higher from there.
Minwax makes a really nice wipe on polyuerathane to make it sexy smooth. I use it on rifle stocks and other sex toys.
Minwax makes a really nice wipe on polyuerathane to make it sexy smooth. I use it on rifle stocks and other sex toys.
Re: my project this weekend, ankle/wrist stocks.
I know lots of people get excited by guns, but this is the first time I have heard them referred to as sex toys!marylandsissy wrote:I use it on rifle stocks and other sex toys.
There's a fine line between cuddling and holding someone down so they can't get away.
The beatings will continue until morale improves.
Do not meddle in the affairs of dragons - for you are crunchy and good with ketchup.
The beatings will continue until morale improves.
Do not meddle in the affairs of dragons - for you are crunchy and good with ketchup.
- bound_jenny
- Moderator
- Posts: 10268
- Joined: 09 Dec 2007, 12:37
- Location: Montreal, Canada, Great Kinky North
Re: my project this weekend, ankle/wrist stocks.
LMAO...cdinbonds wrote:I know lots of people get excited by guns, but this is the first time I have heard them referred to as sex toys!marylandsissy wrote:I use it on rifle stocks and other sex toys.
Do they come in vibrating models too?
Jenny.
Helplessness is a doorway to the innermost reaches of the soul.
If my corset isn't tight, it just isn't right!
Kink is the spice of life!
Come to the Dark Side - we have cookies!
If my corset isn't tight, it just isn't right!
Kink is the spice of life!
Come to the Dark Side - we have cookies!
Re: my project this weekend, ankle/wrist stocks.
Yes, but you need a federal license to own them.bound_jenny wrote:LMAO...cdinbonds wrote:I know lots of people get excited by guns, but this is the first time I have heard them referred to as sex toys!marylandsissy wrote:I use it on rifle stocks and other sex toys.
Do they come in vibrating models too?
Jenny.
- bound_jenny
- Moderator
- Posts: 10268
- Joined: 09 Dec 2007, 12:37
- Location: Montreal, Canada, Great Kinky North
Re: my project this weekend, ankle/wrist stocks.
Better put the safety on before using it - you wouldn't want it to go off down there...
And don't go ahead half-cocked...
In French, a rifle stock is a "crosse"... which is also used colloquially for masturbation (crosser)...
Oh, this is too good.
Jenny.
And don't go ahead half-cocked...
In French, a rifle stock is a "crosse"... which is also used colloquially for masturbation (crosser)...
Oh, this is too good.
Jenny.
Helplessness is a doorway to the innermost reaches of the soul.
If my corset isn't tight, it just isn't right!
Kink is the spice of life!
Come to the Dark Side - we have cookies!
If my corset isn't tight, it just isn't right!
Kink is the spice of life!
Come to the Dark Side - we have cookies!
Re: my project this weekend, ankle/wrist stocks.
So the place where you store your rifle might be a.... crosse-dresser?
I really like the stocks and hope there's more updates on them!
I really like the stocks and hope there's more updates on them!
Re: my project this weekend, ankle/wrist stocks.
Time to invest in a nice random orbit sander? or maybe other forms of motivationsolostill wrote:(since i hate sanding lol)
Re: my project this weekend, ankle/wrist stocks.
Built my own CNC router over the holidays. Using it for another project now but I may have time to make some use of it soon. Sure makes nice holes of varying shapes.s661055 wrote:Looks good.. I'm planning to be working with some MDF and a CNC-router for a little project of my own..