www.BoundAnna.com

i just ordered one of these to play with.

https://www.ebay.com/itm/Huge-Metal-Plu ... 2749.l2649

i though, for the money, why not?

its weird though. in the description, it says 38mm, which equates to roughly 1.5". but then it also says its 1.8" minimum size, so i dont know. i guess i'll just have to do some stretching beforehand if its 1.8".

should be fun once its in though. i could lock it inside me and then lock it to the bed so its the only thing anchoring me to the bed till morning.

i'll make sure to use a condom on it, since i dont want it "biting" my hemorrhoid.

BTW, i have my large njoy plug in me currently while typing this.

So far all those expanding plugs so far have had me worried about getting "bit" by them.
Even if covered by a condom.
Do tell us how it turns out.

as soon as it gets here, i will be playing with it. i'll make sure to post how it goes.

I have such a plug
You have to get some matches to open  in ass.

I think that is better.

kilus31 wrote: You have to get some matches to open in ass.

??????? not quite sure im understanding this.

TNTBound wrote:

kilus31 wrote: You have to get some matches to open in ass.

??????? not quite sure im understanding this.

I believe it has to do with the expression "setting a fire under someone's ass".

But I would be very careful when playing with open flame around there - the gases that come out can be extremely flammable.



Jenny.

my new plug should be here on monday, along with a new stainless steel collar!

I cant wait to try them out!

ok, got the buttplug in the mail along with some condoms and tried out the new toy. inserting the plug was no problem, no pinching with the condom on it. but when it came to opening it up while it was inside me, it didnt work too well. no matter what i tried, i couldnt get it to start opening up. i even tried resting the plunger on the wooden bed frame while i pushed down on the two side bars with my thumbs and it STILL wouldnt open. this was after i even put some silicone lube on the sliding mechanism too! i cant believe that there is so much pressure that it wont open...

anyone with one of them have any tips?


EDIT: i currently have a 1.65" (around 1.5" at the shaft) trainer plug in to stretch myself a bit to see if i can get the locking plug to work.

TNTBound wrote:ok, got the buttplug in the mail along with some condoms and tried out the new toy. inserting the plug was no problem, no pinching with the condom on it. but when it came to opening it up while it was inside me, it didnt work too well. no matter what i tried, i couldnt get it to start opening up. i even tried resting the plunger on the wooden bed frame while i pushed down on the two side bars with my thumbs and it STILL wouldnt open. this was after i even put some silicone lube on the sliding mechanism too! i cant believe that there is so much pressure that it wont open...

anyone with one of them have any tips?


EDIT: i currently have a 1.65" (around 1.5" at the shaft) trainer plug in to stretch myself a bit to see if i can get the locking plug to work.

I have heard some people say they had to take the o-ring off to get it to open right, I am not sure about that just something I recall seeing about them.

thatthat21 wrote:

TNTBound wrote:ok, got the buttplug in the mail along with some condoms and tried out the new toy. inserting the plug was no problem, no pinching with the condom on it. but when it came to opening it up while it was inside me, it didnt work too well. no matter what i tried, i couldnt get it to start opening up. i even tried resting the plunger on the wooden bed frame while i pushed down on the two side bars with my thumbs and it STILL wouldnt open. this was after i even put some silicone lube on the sliding mechanism too! i cant believe that there is so much pressure that it wont open...

anyone with one of them have any tips?


EDIT: i currently have a 1.65" (around 1.5" at the shaft) trainer plug in to stretch myself a bit to see if i can get the locking plug to work.

I have heard some people say they had to take the o-ring off to get it to open right, I am not sure about that just something I recall seeing about them.

i had the o ring off, but i had a condom over it. i even tried once without the condom to see if that was the problem, but it still wouldn't open (i really don't recommend that, since i felt a couple sharp edges on it as it was going in and then coming out, and then the cleaning issue).

TNTBound wrote:

thatthat21 wrote:

TNTBound wrote:ok, got the buttplug in the mail along with some condoms and tried out the new toy. inserting the plug was no problem, no pinching with the condom on it. but when it came to opening it up while it was inside me, it didnt work too well. no matter what i tried, i couldnt get it to start opening up. i even tried resting the plunger on the wooden bed frame while i pushed down on the two side bars with my thumbs and it STILL wouldnt open. this was after i even put some silicone lube on the sliding mechanism too! i cant believe that there is so much pressure that it wont open...

anyone with one of them have any tips?


EDIT: i currently have a 1.65" (around 1.5" at the shaft) trainer plug in to stretch myself a bit to see if i can get the locking plug to work.

I have heard some people say they had to take the o-ring off to get it to open right, I am not sure about that just something I recall seeing about them.

i had the o ring off, but i had a condom over it. i even tried once without the condom to see if that was the problem, but it still wouldn't open (i really don't recommend that, since i felt a couple sharp edges on it as it was going in and then coming out, and then the cleaning issue).

Good to know. Thank you for all the info so far on this. I have looked at them for some time and really wanted to try one, but was worried how well they worked.

i think if you got the style that has threads to expand the plug, it should work pretty good. but as it is with this one, i cant open it inside myself. i might try a set of channel lock pliers to see if i can get it to open with them.

TNTBound wrote:........ i might try a set of channel lock pliers to see if i can get it to open with them.

Do be careful, James!

Any follow up? Keen on one myself.