Pictures of belts/ devices?
Posted: 01 Aug 2017, 15:09
Anybody else interested in sharing pics of their belts, and/ or devices?
This is a few of mine, the belt on the left is the one I "built" using my old Jones front shield, and chains. The waistband is still raw aluminum with no padding or edging, Iv'e been losing a bit of weight, and don't want to waste a 1 1/4" strip of stainless, if its only going to fit for a month. The belt with the black trim is my Hilmer-built Jones-style one, with thigh bands and the bra. I was about 9" smaller around when I had it made. I made the bra band as well, its left raw aluminum for now til I figure out where I will end up, size-wise. There are short chains that attach to nipple rings, and lock outside the cup, so removal is quite impossible. I will be re-making this whole setup, save for the chains this winter. I have all the stainless, padding, edging and everything, just need some time, and another 40 pounds to go. I don't have access to the locks, or keys to the belt (We BOTH decided that was best, I'm pretty tricky sometimes), we have a small lock box, that contains 40 or so small luggage locks and keys, plus the waist and bra band locking discs and keys. The disc on the tube stays there, I can get in without removing the tube from the belt. There is a rear shield somewhere, but we don't use that very often, as I'm home all day (9 hours) by myself, and would probably need to take it off sometimes.
The cages are assorted ones I have picked up, mostly from ebay, except the one with no ring, I built that as an experiment from stainless pipes, cut down to 1/4" wide, with some 1/8 stainless rod, and some very thin stainless ribbon. The ring is on my bench somewhere right now... There is a black hole in my shop that visits, removes things, and brings them back later, right where I left them. The "iron maiden" cage is quite possibly the most cruel toy we own. As you can see, its a good bit larger than my regular cages, which allows for some expansion, then the spikes. I have not been able to stay in it for more than a couple hours, and that was "installed" while I was in the sleepsack, so I had no choice.
This is a few of mine, the belt on the left is the one I "built" using my old Jones front shield, and chains. The waistband is still raw aluminum with no padding or edging, Iv'e been losing a bit of weight, and don't want to waste a 1 1/4" strip of stainless, if its only going to fit for a month. The belt with the black trim is my Hilmer-built Jones-style one, with thigh bands and the bra. I was about 9" smaller around when I had it made. I made the bra band as well, its left raw aluminum for now til I figure out where I will end up, size-wise. There are short chains that attach to nipple rings, and lock outside the cup, so removal is quite impossible. I will be re-making this whole setup, save for the chains this winter. I have all the stainless, padding, edging and everything, just need some time, and another 40 pounds to go. I don't have access to the locks, or keys to the belt (We BOTH decided that was best, I'm pretty tricky sometimes), we have a small lock box, that contains 40 or so small luggage locks and keys, plus the waist and bra band locking discs and keys. The disc on the tube stays there, I can get in without removing the tube from the belt. There is a rear shield somewhere, but we don't use that very often, as I'm home all day (9 hours) by myself, and would probably need to take it off sometimes.
The cages are assorted ones I have picked up, mostly from ebay, except the one with no ring, I built that as an experiment from stainless pipes, cut down to 1/4" wide, with some 1/8 stainless rod, and some very thin stainless ribbon. The ring is on my bench somewhere right now... There is a black hole in my shop that visits, removes things, and brings them back later, right where I left them. The "iron maiden" cage is quite possibly the most cruel toy we own. As you can see, its a good bit larger than my regular cages, which allows for some expansion, then the spikes. I have not been able to stay in it for more than a couple hours, and that was "installed" while I was in the sleepsack, so I had no choice.