Smartplugs
Smartplugs
My release has always been a key frozen in something. While this method has always worked for me, it isn’t without its share of issues. I once badly underestimated the time the ice would take to melt because I failed to consider the weather and outside temp in the planning. One of my best adventures ever, but not what I had planned.
I have purchased a couple TP-Link HS110 smartplugs. They can controlled by Alexa, or by an app. Easily backed up by daisy chaining a traditional mechanical electric timer. At present my thoughts are to use fail safe door magnets combined with a cage or stock (pillory) type set up.
Any suggestions? I have searched and haven’t found any mention of smartplugs.
I have purchased a couple TP-Link HS110 smartplugs. They can controlled by Alexa, or by an app. Easily backed up by daisy chaining a traditional mechanical electric timer. At present my thoughts are to use fail safe door magnets combined with a cage or stock (pillory) type set up.
Any suggestions? I have searched and haven’t found any mention of smartplugs.
-
- **
- Posts: 149
- Joined: 07 Nov 2013, 03:23
Re: Smartplugs
Been looking at the smart plugs as well. I have two right now, and just have been playing with them around the house. I got iDevices Switch - WiFi Smart Plug w/ Energy Monitoring (IDEV0001ANP5) from amazon. They work with both apple and amazon. I have been using my Apple TV as the controller for the devices on a schedule, and I use Alexa to do my voice commands around the house (mainly because have echo dots all over the house and do not all ways have my phone on me for hey siri). The scheduling has been working great with the apple TV no problems as of yet and it have been doing everything it should be for about 3 months now. In that time were have been updates, and a few power outages, and even an internet outage or two and still works like it should.
So with out taking over the thread to much I have been looking for a place to buy a mag lock that you can just plug into the wall power. If you have a link or something I would really like it. I have so many ideas on how to use the logs and the plugs with it all being controlled from some one else on their phone or via auto schedules.
Thank you for any info that some one can provide, and hope you have fun with your devices!
So with out taking over the thread to much I have been looking for a place to buy a mag lock that you can just plug into the wall power. If you have a link or something I would really like it. I have so many ideas on how to use the logs and the plugs with it all being controlled from some one else on their phone or via auto schedules.
Thank you for any info that some one can provide, and hope you have fun with your devices!
Re: Smartplugs
My thoughts exactly. This one I found on a door not being used. It is a monster. 1200 lbs of holding. I am already starting to think of ways to make this work. If you search on eBay there are many and they are not expensive.
https://www.ebay.com/itm/OWSOO-12V-Elec ... SwLnBX5GBF
https://www.ebay.com/itm/OWSOO-12V-Elec ... SwLnBX5GBF
-
- **
- Posts: 149
- Joined: 07 Nov 2013, 03:23
Re: Smartplugs
I can find plenty of the door parts my question I guess it more getting it wired to the wall. I know I am going to need a converter from AC to DC, but guess I would rather have some one say this is what I am using and it works and does not over heat and stuff like that. I just get worried about having all the right voltage and parts so everything works right and I do not spend money on something that is not going to work right.CD Tammy wrote:My thoughts exactly. This one I found on a door not being used. It is a monster. 1200 lbs of holding. I am already starting to think of ways to make this work. If you search on eBay there are many and they are not expensive.
https://www.ebay.com/itm/OWSOO-12V-Elec ... SwLnBX5GBF
Re: Smartplugs
Using Alexa to control locks? What could possibly go wrong?
You: Alexa! engage the lock for one hour
Alexa: You didn't say 'please' so I'm going to make it three hours to teach you some manners
You: Alexa! engage the lock for one hour
Alexa: You didn't say 'please' so I'm going to make it three hours to teach you some manners
Re: Smartplugs
I am planning to engage the log via an app with a start time and end time. My back up will be a mechanical timer switch like used for Christmas lights.
Re: Smartplugs
I use a door magnet like in the previous picture with a 12v 1amp converter. It doesn't get hot as it is designed for continuous use holding a door shut. It is as reliable as the timing device you use.thatthat21 wrote:I can find plenty of the door parts my question I guess it more getting it wired to the wall. I know I am going to need a converter from AC to DC, but guess I would rather have some one say this is what I am using and it works and does not over heat and stuff like that. I just get worried about having all the right voltage and parts so everything works right and I do not spend money on something that is not going to work right.CD Tammy wrote:My thoughts exactly. This one I found on a door not being used. It is a monster. 1200 lbs of holding. I am already starting to think of ways to make this work. If you search on eBay there are many and they are not expensive.
https://www.ebay.com/itm/OWSOO-12V-Elec ... SwLnBX5GBF
-
- **
- Posts: 149
- Joined: 07 Nov 2013, 03:23
Re: Smartplugs
Where did you get it at and do you have a link?EricClut wrote:I use a door magnet like in the previous picture with a 12v 1amp converter. It doesn't get hot as it is designed for continuous use holding a door shut. It is as reliable as the timing device you use.thatthat21 wrote:I can find plenty of the door parts my question I guess it more getting it wired to the wall. I know I am going to need a converter from AC to DC, but guess I would rather have some one say this is what I am using and it works and does not over heat and stuff like that. I just get worried about having all the right voltage and parts so everything works right and I do not spend money on something that is not going to work right.CD Tammy wrote:My thoughts exactly. This one I found on a door not being used. It is a monster. 1200 lbs of holding. I am already starting to think of ways to make this work. If you search on eBay there are many and they are not expensive.
https://www.ebay.com/itm/OWSOO-12V-Elec ... SwLnBX5GBF
Re: Smartplugs
I got mine from eBay. Do a search for electric door locks. http://www.ebay.co.uk/itm/Door-DC12V-El ... SwImRYmpHJthatthat21 wrote:Where did you get it at and do you have a link?
-
- **
- Posts: 149
- Joined: 07 Nov 2013, 03:23
Re: Smartplugs
Ok, but what about the power for it?Sashauk wrote:I got mine from eBay. Do a search for electric door locks. http://www.ebay.co.uk/itm/Door-DC12V-El ... SwImRYmpHJthatthat21 wrote:Where did you get it at and do you have a link?
Re: Smartplugs
Again eBay. Search for 12v power supply - https://www.ebay.co.uk/itm/AC-DC-Power- ... Mg0lw92yOQthatthat21 wrote:Ok, but what about the power for it?
Re: Smartplugs
I found this one mounted on a door. It was unused since we long ago blocked that door from the other side. I traced the wiring back and got the DC adapter. It is a 350 mA @ 24 VDC. I looked up the specs for this lock, it is the 1511 Single EMLock and this matched the specs shown. It could be a 670 mA 12 @ VDC or a 350 mA @ 24 VDC. It was actually operating for years. To open the door, you would press a green button next to the door but since the door was blocked from the other side three or four years ago, this has just been holding it shut.
I am going to test it thoroughly. I’ll attach it to the rafters of my storage building then hang a weigh from it. Set the timers for release and wait for the thud. (I’ll put them close to the floor.)
I am going to test it thoroughly. I’ll attach it to the rafters of my storage building then hang a weigh from it. Set the timers for release and wait for the thud. (I’ll put them close to the floor.)
Re: Smartplugs
I use the door lock magnet as my release mechanism for self bondage. I have posted pictures of it here before.
I always (well, ever since the "problem") use two timers in series. I typically use a spring wound timer that will give me up to an hour, and then plug that into a common lamp timer set for a few hours.
Ron
I always (well, ever since the "problem") use two timers in series. I typically use a spring wound timer that will give me up to an hour, and then plug that into a common lamp timer set for a few hours.
Ron
- AssTechWarrior
- **
- Posts: 113
- Joined: 15 Jan 2015, 18:30
Re: Smartplugs
If you are using a 'smart' device for your release mechanism please also use a relatively stupid timer in series.
For example, plus a mechanical lighting timer into the wall then plug your 'smart' device into it. Set the simple timer to 3 or 4 hours so that if your smart system fails you will still be released, just far later.
Safe and alive is alweays better.
For example, plus a mechanical lighting timer into the wall then plug your 'smart' device into it. Set the simple timer to 3 or 4 hours so that if your smart system fails you will still be released, just far later.
Safe and alive is alweays better.
- Sir Cumference
- Moderator
- Posts: 1608
- Joined: 29 Jan 2012, 22:00
- Location: Scandinavia
Re: Smartplugs
They great thing about magnets is, that apart from using a timer to cut the power, you can also make a very simple "pull the plug in case of an emergency “-release.
It may tip over a jar of Thai fish sauce on your favorite pillow, but it will be simple to make and extremely reliable.
It may tip over a jar of Thai fish sauce on your favorite pillow, but it will be simple to make and extremely reliable.
~ Leatherworking, blacksmithing , woodworking and programming are the most pervertable skills you can learn! ~