tower of pain
tower of pain
saw the tower of pain nipple device on the web,looks interesting. Anyone have one and if so how do you like
Re: tower of pain
I have built 2 of these, one for me, one for my slave. They are very effective, allowing you to maintain an exact amount of pull for as long as you wish. The ones I have seen advertised for sale are way overpriced in my opinion. They are relatively easy to make, for only a few dollars in materials.
There's a fine line between cuddling and holding someone down so they can't get away.
The beatings will continue until morale improves.
Do not meddle in the affairs of dragons - for you are crunchy and good with ketchup.
The beatings will continue until morale improves.
Do not meddle in the affairs of dragons - for you are crunchy and good with ketchup.
Re: tower of pain
alright so I was curious and googled "Tower of Pain"....
And well I dont think that I found the right thing, would someone kinda help me out with the idea, it sounds pretty fun
And well I dont think that I found the right thing, would someone kinda help me out with the idea, it sounds pretty fun
Re: tower of pain
There's a fine line between cuddling and holding someone down so they can't get away.
The beatings will continue until morale improves.
Do not meddle in the affairs of dragons - for you are crunchy and good with ketchup.
The beatings will continue until morale improves.
Do not meddle in the affairs of dragons - for you are crunchy and good with ketchup.
Re: tower of pain
Hmmm. Need to spend some time in the garage.....
Re: tower of pain
oh ok, I guess I did find the right thing, I guess I expected something a little more bigger.
Re: tower of pain
Trust me, it's plenty big enough to cause some serious pain!
There's a fine line between cuddling and holding someone down so they can't get away.
The beatings will continue until morale improves.
Do not meddle in the affairs of dragons - for you are crunchy and good with ketchup.
The beatings will continue until morale improves.
Do not meddle in the affairs of dragons - for you are crunchy and good with ketchup.
- bound_jenny
- Moderator
- Posts: 10268
- Joined: 09 Dec 2007, 12:37
- Location: Montreal, Canada, Great Kinky North
Re: tower of pain
Delicious pain!cdinbonds wrote:Trust me, it's plenty big enough to cause some serious pain!
A nice tight armbinder to keep the hands away and you're set for some fun.
Jenny.
Helplessness is a doorway to the innermost reaches of the soul.
If my corset isn't tight, it just isn't right!
Kink is the spice of life!
Come to the Dark Side - we have cookies!
If my corset isn't tight, it just isn't right!
Kink is the spice of life!
Come to the Dark Side - we have cookies!
Re: tower of pain
used something similar on my play-partner a while ago, but it used suction cups instead of clamps. I gave up trying to use it because one of the cups had a leak and it kept popping off, it became impossible to keep a straight face, you can't keep up the Domly atmosphere when you keep giggling
be a switch, double the fun
Re: tower of pain
Just made my own! Total cost was about $30 with the most expensive part being the actual clover clamps.
I bought the clamps from www.wwlhardware.com , he actually sells hardware for making your own toys! The rest came from a local hardware store.
Here's a quick DIY:
12" dowel rod, 3/4" in diameter
8"x1.5"x1/4" wood board
2" metal spacer, 1/4" diameter
#8-32 12" metal rod
#8-32 nuts
2 clover clamps
If you look at a picture like the one posted in this thread, you can pretty much figure out how everything goes together. All you need is a drill and a little patience and voila! I'll post some pictures of mine when I get a chance. I would like to paint it and make it look a little more professional before I go showing off my homemade toys.
I bought the clamps from www.wwlhardware.com , he actually sells hardware for making your own toys! The rest came from a local hardware store.
Here's a quick DIY:
12" dowel rod, 3/4" in diameter
8"x1.5"x1/4" wood board
2" metal spacer, 1/4" diameter
#8-32 12" metal rod
#8-32 nuts
2 clover clamps
If you look at a picture like the one posted in this thread, you can pretty much figure out how everything goes together. All you need is a drill and a little patience and voila! I'll post some pictures of mine when I get a chance. I would like to paint it and make it look a little more professional before I go showing off my homemade toys.