not sure if this is been built before or discussed... but i was thinkin of gettin a 1/2 inch id piece of pipe.. abs/pvc.. and two end caps... with holes drilled in them dead center... one end would have an eyebolt threw it with bolts on each side of the end cap... and a O ring wire connector on it somewhere... on the other end would be another eyebolt, but on the inside it would pass threw a spring, then a washer, then bolted on the end.. with a wire connector on it too...
so basicly you have to keep pulling the eyebolts apart or they will make an electrical connection inside.... a bit of fine tuning of measurements and what not.. but could be used in various ways.... was thinking would be good to secure to an eyehook in the ceiling and some clover clamps... so you must keep pulling on them or something would be turned on... maybe not the television or a lamp.. but a tens unit or some kind of punishment device.... so you get to choice from it and pullin on the nipple clamps... meh.... the random thought of the day..
device idea..
- onestrangeguy
- ****
- Posts: 955
- Joined: 02 Sep 2008, 06:41
- Location: Colorado USA
Re: device idea..
Your idea sounds to me as though it might have posabilities.
To perhaps greatly simplify your basic idea, you're describing a device which requires that you keep constant tention on your nipple clamps or receive some sort of nasty treat.
To perhaps greatly simplify your basic idea, you're describing a device which requires that you keep constant tention on your nipple clamps or receive some sort of nasty treat.
- invunrible
- **
- Posts: 95
- Joined: 01 Jan 2009, 13:24
- Location: New Zealand
Re: device idea..
I wonder if you could get some mechanical fish scales, and attach a micro switch to it, Then you can chooes exactly how much force needs to be pulled OR ELSE.
something like this
something like this
- Kronopticon
- ****
- Posts: 953
- Joined: 06 Sep 2009, 20:07
- Location: United Kingdom
- Contact:
Re: device idea..
just thinking about this, and it'd be interesting for gym equipment..... maybe if you wanna get really interesting, you could turn a bench press into a full body workout
the idea being that you have to keep the bar off the bench for as long as possible, otherwise, you get a strong jolt from a TENS machine into your stomache and legs
the idea being that you have to keep the bar off the bench for as long as possible, otherwise, you get a strong jolt from a TENS machine into your stomache and legs
-
- ****
- Posts: 617
- Joined: 03 May 2009, 04:09
- Location: Midwest, USA
Re: device idea..
far too dangerous, at least imo.Kronopticon wrote:just thinking about this, and it'd be interesting for gym equipment..... maybe if you wanna get really interesting, you could turn a bench press into a full body workout
the idea being that you have to keep the bar off the bench for as long as possible, otherwise, you get a strong jolt from a TENS machine into your stomache and legs
- Kronopticon
- ****
- Posts: 953
- Joined: 06 Sep 2009, 20:07
- Location: United Kingdom
- Contact:
Re: device idea..
that all depends on how much weight you use. and of course, i wouldnt allow any circumstance for the electricity to pass through the body.