Looking for new punishments...

Post your scenarios here. You can also request a scenario here.
Tenderfoot88
***
Posts: 458
Joined: 17 Sep 2013, 08:00
Location: British Columbia, Canada

Re: Looking for new punishments...

Post by Tenderfoot88 »

Technically, as long as entry and exit points for current are stable (not prone to shifting - complete removal just breaks the circuit) and the path between them doesn't hit any core-body-function organs, the electricity should be safe.

Assuming we're not setting up an overnight situation, you need your lungs (including diaphragm and upper chest muscles), heart and brain, and the nerves connecting them together. For safety's sake, it's probably best to stay well away from the diaphragm, especially in a bondage situation where you can't just instantly kill power. If you make your diaphragm do the ineffective trembling that feels so good on your leg muscles, you're not drawing breath. (If you make your heart do it, you're not pumping blood, and the heart doesn't always decide to correct itself...hence defibulators.... which is worse, but either are potentially fatal) I'm not sure what electrocuting the brain does, but I'm sure it messes with things. A short circuit in a computer tends to cause damage, and the brain is essentially a biological computer.

Arms are normally ruled out, because the typical assumption is that you're grounded by your feet (standing), so if you have one electrode touching but not the other, the path for that moment runs up to the elbow, down the torso, and through all those important organs that we don't want to electrocute. Nipple play is similarly risky, though it's pretty common in e-stim porn. For those, I'd just attach both electrodes (and that's both electrodes on the same arm or nipple), and only then turn the power on; cut the power before removing the electrodes.

There might be some implications to electrocuting the stomach/liver/kidneys, etc for extended periods of time; I think even the Nazi survival experiments missed out on lower-body electrocution, so there's no real data. Unless you're actually a guinnea pig, I don't recommend being a guinnea pig. (And if you are a guinnea pig, try to avoid all those big things with 2 legs that walk upright because they're dangerous)

That said, running a current through the entire leg shouldn't be that bad. In one of the more extreme pornos I've seen, the model had her feet in two metal buckets - each bucket was attached to one electrode of the circuit. And they sprayed her lower legs with water (salt water, I assume, given her reaction) - thus changing, dramatically, how the circuit conducted through her legs. While it looked incredibly intense, there didn't seem to be any permanent damage done; just boatloads of pain. (That said, I'd still consider the water use a mistake - even with all the backup they might have had offscreen, the idea of water and electricity being mixed is just forbidden, at least to me.)
uncannymoebius
**
Posts: 98
Joined: 23 Mar 2014, 08:39

Re: Looking for new punishments...

Post by uncannymoebius »

Claudia wrote:Ha Ha Ha... No, I'm not going to swallow coins... The main reason I think this will work is that I have seen fetish videos where contacts on the heals of a girls feet are set to cause electrical charges in a dildo. I think they were using the same device as I have. I know about cramps, I often get them in my legs when the power is set really high. I like the concept but it will take a bit of experimenting to make it work.
It seems there are legit electricians in this community that would know much more than I but but wouldn't it work because you are completing the circuit?

I say because if that's true, wouldn't the current face resistance in your feet too? Unless you insulated the notional pressure switch?
Claudia
**
Posts: 151
Joined: 24 Feb 2012, 18:44

Re: Looking for new punishments...

Post by Claudia »

Tenderfeet, Thank you for the very informative information.... I do keep electrical contacts below my waist, my ass and pussy primarily. I do get cramps in my legs, my ass cheeks clench, my toes curl all the time pain hits my ass and pussy... amazing feeling
Claudia
**
Posts: 151
Joined: 24 Feb 2012, 18:44

Re: Looking for new punishments...

Post by Claudia »

Okay everyone, thank you for all the suggestions. I have been shopping for all of the material needed to try them all... I found a copper sheet that is about 18" square, some copper strips and a coil of wire. I already have the foil used to cook with but it's aluminum and I kinda thought aluminum didn't conduct electricity. I'll find out.
User avatar
cdinbonds
*****
Posts: 2384
Joined: 08 Apr 2006, 21:12
Location: South Central Washington

Re: Looking for new punishments...

Post by cdinbonds »

Aluminum conducts almost as well as copper. Aluminum is used as wire for electrical service entrances to buildings because it is cheaper than copper.
There's a fine line between cuddling and holding someone down so they can't get away.
The beatings will continue until morale improves.
Do not meddle in the affairs of dragons - for you are crunchy and good with ketchup.
gemt
***
Posts: 313
Joined: 01 Nov 2012, 17:04
Location: East Anglia

Re: Looking for new punishments...

Post by gemt »

cdinbonds wrote:Aluminum conducts almost as well as copper. Aluminum is used as wire for electrical service entrances to buildings because it is cheaper than copper.
The only issue with using Aluminium is it tarnishes easily, and the tarnish is non-conducting, so it is more difficult to make good electrical contacts. It tarnishes almost instantly at high temperatures which is why it is very difficult to solder or weld.
Claudia
**
Posts: 151
Joined: 24 Feb 2012, 18:44

Re: Looking for new punishments...

Post by Claudia »

Sorry I haven't been around lately, work is taking up most of my time but Master has been a little busy too. I gave up on the copper sheets and contacts on my feet and stuff. I couldn't get it right and dealing with the tin snips and sharp edges was just too much trouble.

Master still makes me go out into the night and even some afternoons with my tits bound and the estim butt plug and a new electric shocking pussy clamp. Master has a hook attached to this pussy clamp and it is on a little leash that reaches to the top rim of the trash container on the street corners when I'm stretching up on my tiptoes. It is similar to the metal crotch strap that I've used so many times before. I still have a large estim butt plug in place while wearing the pussy clamp that squeezes my clit between the two electrical pads. So now I can cozy up to one of my favorite trash enclosures on a busy downtown corner and strain up on my tiptoes so I can get the hook over the top rim. My clit is painfully pulled up and I have to stay on my toes because the leash is so short I cannot stand flatfooted. I'm essentially hanging by my clit from a trash enclosure in the middle of downtown with people walking here and there all around me.

I have to strain to hang there with only my toes touching the ground and with my clit throbbing in pain because of the tightness of the clamps and the fact that the clamp and thus my clit is being pulled and stretched up keeping me on my toes. I have to hang there trying to look like I am just waiting for a friend or something that won't attract attention. Sometimes I'll pull out my cell phone and look at the screen so people around me will think that I am checking messages or something boring like that. Master then can make me punish myself by pushing the punishment button on the remote. The power settings are usually high enough that it causes an intense shock in both my ass and my now my clit that is trapped by the pussy/clit clamp. The shock is so strong that it makes my legs tighten up and nearly cramp loosing my concentration lifting my leg and causing the clamp to stretch my pussy up higher. My eyes often water up and I have to strain to keep from screaming out loud. This of course is still on a busy downtown street corner with people all around. Master makes me do this little punishment several times a week now, it has become his favorite.

Claudia
BlackrockBoss
*
Posts: 1
Joined: 25 Sep 2012, 19:57

Re: Looking for new punishments...

Post by BlackrockBoss »

Hey claudia,
Have you or your Master tried enemas? These can, depending on how they are administered, be humiliating, painful, demeaning, excruciating, shaming, embarrassing, all at once. You could be trained to take larger enemas, held for increasing lengths of time, made to show off your bulging belly, and be made to expel them in front of others. The nozzles used could range from small to very large, and include colon tubes that go way up into your colon to get a good clean.
You could be made to hold the enema in while having your tits and ass whipped - any unauthorized leakage must result in further punishment!
Good luck!
BB
bobbieb
*
Posts: 1
Joined: 19 May 2017, 04:28

Re: Looking for new punishments...

Post by bobbieb »

Hi Claudia,
I registered on this site to reply to you. I appreciate and enjoy your descriptions of your adventures. You are an intelligent, successful, self-reliant, beautiful woman. It shows in your writings.

Re: Looking for new punishments:
So far you have wanted your erogenous zones stimulated coupled with risk of humiliation through exposure and being preyed upon. Let’s continue these themes. But first you have favorably considered some toys but have not mentioned completing them. You also have some fantasies unfulfilled, mostly because of danger. You need a new outdoor play site close to home. Finally, you deserve a man, the right man. So much to consider. Given that I am breaking up this reply into segments.
Past toys considered apparently not completed:
• Breast press
• “U” bolt tittie shelf
• Nipples stretcher, either separately or combined with the breast press
• Momentarily on and momentarily off press switches to control electrical devices
• Sisal rope burn walk
• Electrified horse
Related toy thoughts
• Sharp-backed horse

Breast press:
Here’s a breast press build idea that combines potential humiliation with a great product. Follow the instructions found at http://www.saroftreve.com/workshop/bpress.shtml. Make the cardboard templates for the top and bottom board shapes with your personal torso fit. Given your breast size I would make the top plate 2 ½ inches wide instead of the 2 inches mentioned on the site. The bottom plate would likely be ¼ to ½ inches wider than the top. Take the templates to a woodworker’s shop and ask the man there to make the two boards to the templates’ shape, with the proper holes, edge roundings, and finish. It is up to you whether you imply its use or try to hide it. Wear an outfit where the size and shape of your breasts and ribcage are obvious. I’m hoping he will figure out what you are asking him to make.

Assemble the press using stuff from Ace Hardware. You could ask the woodworker or a handyman to assemble it for you.

Substitute Velcro stapes (Ace Hardware) or fabric straps (fabric store) OR go to a leather shop (tack shop) and have him make custom leather straps to fit you. Do you take the assembled press with you?

If you like it, go back to the woodworker to make another press, this time with a more refined shape, and with additions such as ‘vent’ holes which your tittie flesh will push into, or rounded knobs, or points, or estim or tens contact pads (designed so that only same boob to same boob electric paths are possible while a cross heart boob to boob electric path is not possible). Or to make one that incorporates a nipples stretcher.

Nipples stretcher:
Most nipple stretchers adjust the pull on the nipples by a threaded rod. Here is a complicated Rolls Royce threaded rod nipples stretcher. http://www.saroftreve.com/workshop/nistr.shtml

This one you would either have to take to a machine shop or the woodworker (he would substitute wood for many of the aluminum parts, but that is fine). Don’t you think by now you should give the woodworker a good peak at your tits? Or you could ask a local handyman to make this (Angie’s list, etc.) Perhaps he deserves a peak or maybe he needs to take measurements to be sure it fits you right.

This design, like many others relies on the sternum piece (foot) to hold it perpendicular to your body. The sternum piece needs to be about 6 to 8 inches long to hold the stretcher perpendicular when standing unless your nipples are really stretched. Others with a shorter foot require you to be lying down or on your hands and knees. You want to walk about. It can be made with a back-of-the-neck support strap. Adding tie on points is a good idea. As for clamps, make the threaded rod long enough to accommodate clover clamps. Some people prefer simply tying the nipples with a string. Other possibilities are forceps, strong binder clips, and…

Much simpler threaded rod designs are available. Most are made of wood or plastic cylinders with a steel threaded rod. Given how you like lots of stretch, the clamp bar should be strong enough to take the pressure without bending. Aluminum bar stock is actually a good choice. Anyway a decent handyman could make this for you. So could a woodworker or metal craft or machine shop or automobile body shop. Small owner operated shops or an individual would be best. Find one who does not have his wife watching over the place.

Are you going to let him take the measurements? (Oh, I didn’t know you need to know how far my tits extend from my sternum when they are stretched. Let me get this bra off and I’ll tug on my breasts while you measure. Oh, my top is getting in the way of the measurement and keeping me from pulling enough. Okay, I better measure myself, look away. Damn, I can’t judge the distance looking down. You better do it. Is my pulling changing the measurement? Most times my arms would be at my side. Alright, you pull and measure while I stand normally. –Such fun.) (Or have clover clamps tied to a cross bar ready. Then you can clamp your nipples—in front of him—and pull on the cross bar while he measures. Remember, ‘measure twice, cut once’—maybe measure three times. Does bending down change the measurement? What if you pull really hard? –Again fun. You choose which is more fun.)

Other nipple stretchers rely on weights to do the stretching. They do standing up what weights on your nipple clamps do when you are on your hands and knees. They hold the weights out horizontally before going over the front edge. You were on the right track with your “U” bolt tittie shelf. A neck strap would have finished it. Nipple tug would be set by the weights pulling on the nipple clamps through pulleys. But I have a better idea below.

One reader suggested a triangular arrangement, actually an “H” or box or rectangular shape where the base is placed horizontally under your tits and the “H” cross piece or box/rectangle outer edge has attachments for the clamps going to your nipples and attachments for weights to hang below. The reader called it a triangle because from the side it is a triangle, the bottom side being the “H” or box or rectangular shape extending from under your tits, the vertical side being your chest height from where the “H” presses against you under your tits to your stretched nipples, and the top side being the distance from your chest wall to the edge of the “H” or box or rectangle. Anyway, this would work but would need lots of help to be stable. A better starting point is a device that is stabilized by being firmly attached to the base of your breasts.

“U” bolt tittie shelf:
The “U” bolt tittie shelf is a good starting point for a weigh based nipple stretcher, just as you originally intended. The better idea. Don’t use pulleys. Add easily adjusted neck or shoulder support, such as adjustable bra straps. Of course shoulder straps also mean a back strap. Make the neck or shoulder support fully adjustable, perhaps even elastic so you can adjust the amount of the weight taken by your neck or shoulders versus how much weight is taken by your nipples. Have several different points for neck or shoulder straps to attach to the shelf sides so you can adjust the straps’ leverage versus your nipples’ leverage.

With the nipple clamp strings fixed to the shelf end, you adjust the pull by changing the weight on the shelf. How? By adding things, such as glasses of wine, or his shoes, or your cleaning supplies, or kitchen items. (Now consider adding sides and a grippy surface or start with a rectangular serving tray instead of the wood shelf.)

Most ‘tit supported’ serving trays do not clamp to the breasts. They are partly held up by the nipples, yes, but require a back strap at minimum. They generally are not very stable. The “U” bolts add a lot of stability, but you might want to add a back strap in addition to the neck or shoulder straps or elastics. You will need to experiment with different weights to find the most enjoyable balance between nipple support and strap support. You can add fixed weights to the underside of the outer edge of the shelf.

The “U” bolts should be quickly adjustable by using wing nuts or knurled knobs. Lubricate the threads with a thin coat of Vaseline. Consider adding a second pair of “U” bolts ahead of the first pair. Then each tit would be held in place by two “U” bolts, adding to stability and tit pressure.

Nipple stretcher combined with a breast press:
Add a threaded rod and clamp bar assembly to the top or bottom breast press boards, your choice. Perhaps you should visit the woodworker again or the handyman again to add a threaded rod mount and make the clamp bar assembly. (More measurements?)

Momentarily on and momentarily off press switches to control electrical devices:
Momentary switches are readily available. Ditto for latching switches. Ask your woodworker or handyman or ? to make a shallow box with a hinged or deformable lid to hold the switch such that when you press on it with your back or other wide body part, you activate the switch. Want your handyman to solder in the new estim wires? Go for it.

Sisal rope burn walk:
Your texts do not reveal if you ever did the Sisal rope burn walk. You can easily set it up indoors at your current place or maybe better at your high desert location. It was a joy for you to consider all the possibilities. You should have that joy again. We liked making suggestions. If you do it indoors where the rope length is shorter than you want, add complications so you have to make several traverses.

By the way, the next time you carry a Yucca stem, stabilize it by putting on four clover clamps, two on each side of the nipple, two with strings going forward to a screw driven into the front of the stem and two with strings going over your shoulders to a screw driven into the rear of the stem. The front pulls down and the rear pulls up twisting on your areolas should be enjoyably different. Don’t forget your balancing water bottle. Have the shoulder strings go through plastic tubes where they cross your shoulders. Tie the plastic tubes a set distance apart so they don’t fall off your shoulders. OR, you might enjoy the added ridiculousness of wearing an empty cup bra, an underwire bra made with the no cups or with the cups cut out. The bra would complement your tit bindings and give you new attachment points for things. The empty cup bra straps would provide mounting points for the over shoulder plastic tubes. When you get to your destination, perhaps you will celebrate by adding another pair of clamps to your nipples to complete the symmetry.
Electrified horse:
Yes, you can electrify your plastic saw horse even with a butt plug. Use a single pole estim butt plug. Or make two, say, + wires so that both sides of your dual plugs are positive polarity. The remainder of the circuit is the conductive piece on the horse, in this example negative polarity. I suggest a one-inch diameter copper pipe screwed to a 2x2 piece of lumber using copper pipe clamps. While at Home Depot also pick up a 3-foot length of 2-inch aluminum angle.

To use, attach one estim lead to the copper pipe; the other to the estim butt plug. You want the current to go from the plug through your pussy. So add a thin strip of rubber over your butt crack when you tie the butt plug in place. With an insulated butt, the next best place is your pussy. Yeah! Or if you wiggle, your inner thigh. A crackling good time was had by all. Do not add estim pussy or nipple devices. One current path is enough. You could add a current switching device so that a pussy estim could be used alternating with the butt plug. Lizerd, I expect, can show you how.

Sharp-backed horse:
One thing I am surprised you have not tried is the punishment device of pressing your pussy on a sharp board or two boards set at a 45-degree angle. Historic tidbit. The British army during its Red Coat era would punish soldiers by mounting them upon the top of a sharp roof with weights hanging from their feet. Put the 2-inch aluminum angle on your saw horse covering the copper pipe. Add padding as you see fit. Sit down. Tie your ankles to the horse legs or your thighs. Tie your nipples to the front edge so you are leaning forward on your clit. Tie your hands behind you. Add weight going backwards from your hands. Vibrator? Estim? Add your preferred delay escape device. Not much different from your Penitence stand. Enjoy the ride.
Post Reply