Please Delete This Thread
Please Delete This Thread
Deleted.
Last edited by Voshra on 08 Jan 2011, 04:14, edited 1 time in total.
-
- *
- Posts: 22
- Joined: 24 Oct 2008, 20:44
measure the diameter flat and buy some pvc pip that diametor. cut it to like 2 and a half inchs and cap off the on end. then you can drill 2 holes ont he other end and atach them with tiney cahin or small rope to a cock ring, once on you dick will be ina 2.45 inch long tube that fits it wel and it will be hard to get erract
-
- *
- Posts: 3
- Joined: 10 Jun 2010, 21:34
Re: Looking For Way To Make Homemade Chasity For SMALL male
Use a padlock with a pvc bushing if you want to know how...richardnational@aol.com.....I can send you pictures and help you.....I made one for myself and it is impossible to get off without the key......you might also have a small ring welded to the shackle on the padlock so you can chain yourself to the floor, desk or what ever....let me know if you need help
richard
richard
Re: Looking For Way To Make Homemade Chasity For SMALL male
richardnational wrote:Use a padlock with a pvc bushing if you want to know how...richardnational@aol.com.....I can send you pictures and help you.....I made one for myself and it is impossible to get off without the key......you might also have a small ring welded to the shackle on the padlock so you can chain yourself to the floor, desk or what ever....let me know if you need help
richard
that thread is 18 months old, and the member who started it hasn't logged in for about 8 months.
[
Re: Looking For Way To Make Homemade Chasity For SMALL male
you could try the...
DOH. zombie thread is zombie *facepalm*ponylady wrote:that thread is 18 months old, and the member who started it hasn't logged in for about 8 months.
Re: Looking For Way To Make Homemade Chasity For SMALL male
3 inch when flacid?
get a cb3k or a cb6k... they are 3 inch and 3.25 inch...
and if you need something smaller get a cb6000s its 2.50 inch...
dont really see the problem...
most if not all chastity devices on the marked should fit you nicely...
only exeptien i have come across whould be the curve (think its 4.25 long)
get a cb3k or a cb6k... they are 3 inch and 3.25 inch...
and if you need something smaller get a cb6000s its 2.50 inch...
dont really see the problem...
most if not all chastity devices on the marked should fit you nicely...
only exeptien i have come across whould be the curve (think its 4.25 long)
Re: Looking For Way To Make Homemade Chasity For SMALL male
I know this is an old thread, but I'm kinda in the same boat.
Flaccid freestanding it is about 1.5"-2" and can slip out of my BC2k with the largest points.
Kinda in a quandary of what I can do with it.
Flaccid freestanding it is about 1.5"-2" and can slip out of my BC2k with the largest points.
Kinda in a quandary of what I can do with it.