My Ball Locking Invention - For your nuts

Ideas and instructions how you can make your own bondage toys.
Post Reply
BornThisWay
***
Posts: 333
Joined: 26 Dec 2014, 06:15
Location: South East USA, next to the big tree.

My Ball Locking Invention - For your nuts

Post by BornThisWay »

I created this ball locking device with a propane torch and a vice. The smaller shackle was heated to the point it was glowing red then squeezed to narrow the gap to the point it would fit in the larger shackle. The larger shackle is the perfect size to lock around your nuts. I had to place a spacer to prevent the gap from closing unevenly and a guide pin to ensure the holes still lined up. After the desired gap was achieved, I drilled out the threads so that the pin from the large shackle would go through it. For a lower profile device I used the pin with the hex head. It is very comfortable and strict. You will not be able to open it without the hex key. If you like the added kink of an actual lock, I have the trailer hitch lock pin.

I absolutely love these devices, you can put them around your nuts, attach a leash, use it for bondage, it doesn't pinch and is very comfortable.

Its a bit more awkward with the trailer hitch lock, of course.

I incorporate this into almost every session I do.
invention apart.JPG
invention together.JPG
invention with alt locking.JPG
User avatar
CirJohn
*
Posts: 23
Joined: 18 Dec 2014, 18:02

Re: My Ball Locking Invention - For your nuts

Post by CirJohn »

I need to go get some propane....nice idea.
I can be talked into anything once. After that I'm out of excuses.
tiemeupalso
****
Posts: 732
Joined: 19 Sep 2009, 19:03
Location: cameron/rockdale,tx
Contact:

Re: My Ball Locking Invention - For your nuts

Post by tiemeupalso »

really nice.i like the idea of using the allen head screw too.
User avatar
The Slinky
**
Posts: 131
Joined: 19 Jan 2011, 07:17
Location: south California

Re: My Ball Locking Invention - For your nuts

Post by The Slinky »

very cool!
User avatar
picofarad
*
Posts: 39
Joined: 01 Oct 2006, 16:41
Location: Wisconsin
Contact:

Re: My Ball Locking Invention - For your nuts

Post by picofarad »

Could you explain the use of this a bit more? One shackle for each testicle? Could you share the dimensions?
Thanks!
BornThisWay
***
Posts: 333
Joined: 26 Dec 2014, 06:15
Location: South East USA, next to the big tree.

Re: My Ball Locking Invention - For your nuts

Post by BornThisWay »

They are called Bow shackles or Anchor Shackles.
People use the term interchangeably but there is a slight difference between the two.

The bow shackle has a slightly greater curve to it.

I got them either at Home Depot or Lowes.
Here is a picture that should help you determine the size.

It goes around both of the boys.
if you tighten it with a pair of pliers you shouldn't be able to open it by hand.

Uses are only limited by your imagination, please see my post on "Ball stretcher idea" for one idea.
But you could attach it to a chain with a pad lock if you wanted to.

The shackle that I heated up and bent was smaller than the one you put around your nuts.

It may be confusing because I have two of them pictured, but that's because I sometimes use both at the same time.
one pulling forward, and one pulling backward, etc..
size1.JPG
Size2.JPG
User avatar
Dark_Lizerd
*****
Posts: 2416
Joined: 22 Oct 2006, 11:30
Location: New Mexico

Re: My Ball Locking Invention - For your nuts

Post by Dark_Lizerd »

I think the confusion is the "2" loops....
One, the larger one, goes around... the "private parts"...
and the smaller one provides a connection for a tether, leash, or what ever...

Does that help???
All advice is checked, re-checked and verified to be questionable...
Don't ask, we both wont understand the answer...
http://www.mediafire.com/download/09dtr ... e_V2_2.exe Not just for nubies any more...
tkv
*
Posts: 32
Joined: 25 Jul 2009, 14:42
Location: Finland

Re: My Ball Locking Invention - For your nuts

Post by tkv »

Here are a couple of ball shackles that I've made. It took me forever to find the perfect size shackle, wide enough to be comfortable but small enough not to be able to squeeze through. Then one day I was browsing ball stretchers and thought to try the round shackle, and it was indeed more secure and comfortable. The locking method on the square one is a bit over-engineered too, but by far the simplest way is tightening that bolt and leaving the Allen key in the shed.

The pouch is for even more comfort. It has a small webbing hoop at the bottom for hanging weights, so it pulls and squeezes a bit at the same time.
Attachments
sakkeli.jpg
BornThisWay
***
Posts: 333
Joined: 26 Dec 2014, 06:15
Location: South East USA, next to the big tree.

Re: My Ball Locking Invention - For your nuts

Post by BornThisWay »

Very Cool. :wink:
all tied up
**
Posts: 54
Joined: 31 Oct 2016, 13:43
Location: UK

Re: My Ball Locking Invention - For your nuts

Post by all tied up »

Again another simple but effective idea, I'll be trying that one
Underwear? That's just extra washing...
Post Reply