Crued Spanking / Whipping Machine ideas?
- Dark_Lizerd
- *****
- Posts: 2418
- Joined: 22 Oct 2006, 11:30
- Location: New Mexico
Re: Crued Spanking / Whipping Machine ideas?
Sound easy, but....
That is just 1 swat.
It is not repeatable...
Unless it is a spiked paddle and someone is trying to find a way to escape the inevitable...
That is just 1 swat.
It is not repeatable...
Unless it is a spiked paddle and someone is trying to find a way to escape the inevitable...
All advice is checked, re-checked and verified to be questionable...
Don't ask, we both wont understand the answer...
http://www.mediafire.com/download/09dtr ... e_V2_2.exe Not just for nubies any more...
Don't ask, we both wont understand the answer...
http://www.mediafire.com/download/09dtr ... e_V2_2.exe Not just for nubies any more...
Re: Crued Spanking / Whipping Machine ideas?
http://www.slavechris.net/Files/cropper/cropper.html
A low rmp motor, a bolt, a box and a spring. not too tough, always hits in the same spot though.
Most of the parts you could find online at a surplus supplier like surpluscenter.com
A low rmp motor, a bolt, a box and a spring. not too tough, always hits in the same spot though.
Most of the parts you could find online at a surplus supplier like surpluscenter.com
- GreenwichMistress
- **
- Posts: 113
- Joined: 25 Apr 2011, 17:45
- Location: Greenwich, USA
Re: Crued Spanking / Whipping Machine ideas?
Well, the beauty of this one is that if it's wound really tightly, the first smack will be really intense. And the paddle stays on you til you move. If you struggle to get out, then you'll move away from the paddle for a second which will give it another swing at you. It's like a punishment for trying to escape.Dark_Lizerd wrote:Sound easy, but....
That is just 1 swat.
It is not repeatable...
Unless it is a spiked paddle and someone is trying to find a way to escape the inevitable...
But, if it IS only 1 or 2 swats, then they have to be worth the trouble. What about some spikes covered in Icy Hot or Hot Pepper juice? Maybe have a dildo partially inserted and this will whack it in more. (potentially dangerous, though)
What about sand paper? I don't know... what else can go on there?
- Dark_Lizerd
- *****
- Posts: 2418
- Joined: 22 Oct 2006, 11:30
- Location: New Mexico
Re: Crued Spanking / Whipping Machine ideas?
Oh, good... I found this one again...
I was thinking, you said "...wind ropes....", I was picturing something like the torque ropes like on a catapult....
That would only be good for 1 maybe 2 swats...
But, think "bungee cords"... (like giant rubber bands), you could wind them up several times for several swats...
But, set it up like this: The bungee cords at the top and bottom get wound up so that when released, it will spin around and the whip
swatts what ever is in the way...
The only way to stop it is to stick your ass out so that it gets hit by the paddle...
Version 2.0 is set-up so that there are 2 poles, and each one is aimed at a different ass cheek...
Now, what is to stop someone from just standing there and holding the paddles to keep them from swinging???
How about a rope tied to the cock and balls to a pulley and to a weight???
Maybe a bucket that slowly fills with water as long as it raised from the floor, (IE: ass pushed back to hold the paddle)
But it drain when it is lowered to the floor. but there is some weight that stays in the bucket...
Maybe add a cross bar at the hips that prevents the bucket from resting on the floor...
I was thinking, you said "...wind ropes....", I was picturing something like the torque ropes like on a catapult....
That would only be good for 1 maybe 2 swats...
But, think "bungee cords"... (like giant rubber bands), you could wind them up several times for several swats...
But, set it up like this: The bungee cords at the top and bottom get wound up so that when released, it will spin around and the whip
swatts what ever is in the way...
The only way to stop it is to stick your ass out so that it gets hit by the paddle...
Version 2.0 is set-up so that there are 2 poles, and each one is aimed at a different ass cheek...
Now, what is to stop someone from just standing there and holding the paddles to keep them from swinging???
How about a rope tied to the cock and balls to a pulley and to a weight???
Maybe a bucket that slowly fills with water as long as it raised from the floor, (IE: ass pushed back to hold the paddle)
But it drain when it is lowered to the floor. but there is some weight that stays in the bucket...
Maybe add a cross bar at the hips that prevents the bucket from resting on the floor...
All advice is checked, re-checked and verified to be questionable...
Don't ask, we both wont understand the answer...
http://www.mediafire.com/download/09dtr ... e_V2_2.exe Not just for nubies any more...
Don't ask, we both wont understand the answer...
http://www.mediafire.com/download/09dtr ... e_V2_2.exe Not just for nubies any more...
- GreenwichMistress
- **
- Posts: 113
- Joined: 25 Apr 2011, 17:45
- Location: Greenwich, USA
Re: Crued Spanking / Whipping Machine ideas?
That's beautiful. That's the basic idea I was going for but was only thinking of a paddle. With a lighter whip, it'll keep going. I like the idea of accepting the paddle to stop the whip. It's devious. Where did you find that design?
- Dark_Lizerd
- *****
- Posts: 2418
- Joined: 22 Oct 2006, 11:30
- Location: New Mexico
Re: Crued Spanking / Whipping Machine ideas?
I pulled it out of my head...
My first idea was like your rope idea....
several bungee cords streached cieling to floor...
paddle/whip secured in the middle...
then that wound up like a rubber band powered airplane...
but when I drew it, the solid mounted pole sounded better....
My first idea was like your rope idea....
several bungee cords streached cieling to floor...
paddle/whip secured in the middle...
then that wound up like a rubber band powered airplane...
but when I drew it, the solid mounted pole sounded better....
All advice is checked, re-checked and verified to be questionable...
Don't ask, we both wont understand the answer...
http://www.mediafire.com/download/09dtr ... e_V2_2.exe Not just for nubies any more...
Don't ask, we both wont understand the answer...
http://www.mediafire.com/download/09dtr ... e_V2_2.exe Not just for nubies any more...
- GreenwichMistress
- **
- Posts: 113
- Joined: 25 Apr 2011, 17:45
- Location: Greenwich, USA
Re: Crued Spanking / Whipping Machine ideas?
Do you think there's a more portable way to do this so people don't have to rely on anchors on the floor and ceiling? I have good attic room but I won't always want to do it in the same spot. Is there a way you can think of to set it up on some sort of stand? I know that for it to get a good swing, there would need to be a bracket the size of the length of the whip, but maybe there's something I'm not thinking of. You guys are more contraption-minded. I'm more of a "think on the fly" type of girl. Ifi see you tied to a table, bent over, I'm gonna want to wheel in the self spanker and watch you sweat.
- bound_jenny
- Moderator
- Posts: 10268
- Joined: 09 Dec 2007, 12:37
- Location: Montreal, Canada, Great Kinky North
Re: Crued Spanking / Whipping Machine ideas?
To pick up on the rubber-band-powered airplane, not that the propeller is off one end. This principle could be applied here - the whip or other painful implement is set at the end of the shaft instead of the middle - then the device could be made low and compact. I just threw the idea out, so I'll leave the engineering details to the specialists here.
Jenny.
Jenny.
Helplessness is a doorway to the innermost reaches of the soul.
If my corset isn't tight, it just isn't right!
Kink is the spice of life!
Come to the Dark Side - we have cookies!
If my corset isn't tight, it just isn't right!
Kink is the spice of life!
Come to the Dark Side - we have cookies!
- Dark_Lizerd
- *****
- Posts: 2418
- Joined: 22 Oct 2006, 11:30
- Location: New Mexico
Re: Crued Spanking / Whipping Machine ideas?
After reading this... this came to mind... This is part of a picture I found from somewhere under a search for CBT...GreenwichMistress wrote:Do you think there's a more portable way to do this so people don't have to rely on anchors on the floor and ceiling? I have good attic room but I won't always want to do it in the same spot. Is there a way you can think of to set it up on some sort of stand? I know that for it to get a good swing, there would need to be a bracket the size of the length of the whip, but maybe there's something I'm not thinking of. You guys are more contraption-minded. I'm more of a "think on the fly" type of girl. If I see you tied to a table, bent over, I'm gonna want to wheel in the self spanker and watch you sweat.
This would be portable, but not the design like mine, but it would whip for as long as it is on...
(it would make me sweat..)
A portable varable drill strapped to a stand will work quite nicely....
Just adjust the trigger to the speed you want...
All advice is checked, re-checked and verified to be questionable...
Don't ask, we both wont understand the answer...
http://www.mediafire.com/download/09dtr ... e_V2_2.exe Not just for nubies any more...
Don't ask, we both wont understand the answer...
http://www.mediafire.com/download/09dtr ... e_V2_2.exe Not just for nubies any more...
- GreenwichMistress
- **
- Posts: 113
- Joined: 25 Apr 2011, 17:45
- Location: Greenwich, USA
Re: Crued Spanking / Whipping Machine ideas?
Wow. That picture just got my mind racing... ok... take a broom handle and cut it to the proper size. Now get 2 long strips of vinyl or plastic. Cut slits in the bloom handle so the vinyl can slide right in, kinda like those old styrofoam airplanes. Then glue it in one it's even in the middle. Now the engine...
Cut a hole going through the other side. Slide a bungee cord hook through the hole. Now tie the other side of the bungee cord to a lower part. Now start winding, as much as possible. To hold it there, we'd need something. I don't know what, but you could rig this holder to an ice timer that would drop and pull it away... thus making your bottom red.
Thoughts? Details? Fill-ins of holders, or carts to hold the broom handle up?
Cut a hole going through the other side. Slide a bungee cord hook through the hole. Now tie the other side of the bungee cord to a lower part. Now start winding, as much as possible. To hold it there, we'd need something. I don't know what, but you could rig this holder to an ice timer that would drop and pull it away... thus making your bottom red.
Thoughts? Details? Fill-ins of holders, or carts to hold the broom handle up?
Re: Crued Spanking / Whipping Machine ideas?
The last picture reminds me off an shoe cleaning automate.
Plan ahead. Don't be overambitious. Slowly step by step. Play safe. Have fun. And tell us.
Re: Crued Spanking / Whipping Machine ideas?
Making a repeating, automated, and inexpensive device will not be easy. Cutting cost requires additional time and effort for potentially a sub-par device... I have two ideas that may function using wood, a drill, and a hand saw: a catapult and a wooden clock.
The catapult idea is based upon a small wooden toy catapult that I have. This catapult resembles the Wikipedia "Onager (siege weapon)" article and uses twisted cotton thread to both hold the throwing arm and provide the spring action. An elevated cross-beam mounted on an a- frame limits the throwing arm travel. Simple 1" by 3" or 2"x4" lumber could be used for the side beams and 1/4" (6 mm) synthetic rope would work for the rope. A simple dowel through the back end is the winch; a 1/2" dowel could be used. The winch rope ends are attached at the far edges of the dowel and the center attaches to the throwing arm. As the winch is turned, the rope winds onto the dowel in a spiral pattern toward the center and maintains the small winch drum radius which maximizes the leverage. Some method to suddenly release the tension and then reset the winch line would need to be devised.
The wooden clock idea is more theoretical, but also has more potential. Some old clocks are powered by hanging weights. One weight powers the clock circuit while another powers the hourly chimes (or other hourly indicators). Through careful wood carving you could make wooden sprockets, gears, cams, and levers to regularly, like clock-work, swing a wooden rod with sufficient force to ensure the user takes notice of the passing time. Buckets filled with water, sand, paper, lead, steel, AOL advertisements, etc. could potentially provide thousands of foot-pounds of energy. Could clock-tower designers have already figured this out? Maybe... Several websites make printable templates for cutting wooden gears at home.
Google mechanical timers, mechanical delays, and mechanical clocks to find a cheap way to time the space between activations. Rolling marbles, falling sand, dripping water, and melting ice can all give regular intervals. A tube filled with marbles may give 1 delay unit per marble. Sand always falls at 32-feet-per-second-per-second or 16 ounces per pound (1000 grams per kilogram).
If I was building one, I would just buy another Arduino($20), 2 air cylinders ($50), 2 air valves ($60), and a 1/2 gallon air tank ($35) to make one (~$200). To each, his own...
The catapult idea is based upon a small wooden toy catapult that I have. This catapult resembles the Wikipedia "Onager (siege weapon)" article and uses twisted cotton thread to both hold the throwing arm and provide the spring action. An elevated cross-beam mounted on an a- frame limits the throwing arm travel. Simple 1" by 3" or 2"x4" lumber could be used for the side beams and 1/4" (6 mm) synthetic rope would work for the rope. A simple dowel through the back end is the winch; a 1/2" dowel could be used. The winch rope ends are attached at the far edges of the dowel and the center attaches to the throwing arm. As the winch is turned, the rope winds onto the dowel in a spiral pattern toward the center and maintains the small winch drum radius which maximizes the leverage. Some method to suddenly release the tension and then reset the winch line would need to be devised.
The wooden clock idea is more theoretical, but also has more potential. Some old clocks are powered by hanging weights. One weight powers the clock circuit while another powers the hourly chimes (or other hourly indicators). Through careful wood carving you could make wooden sprockets, gears, cams, and levers to regularly, like clock-work, swing a wooden rod with sufficient force to ensure the user takes notice of the passing time. Buckets filled with water, sand, paper, lead, steel, AOL advertisements, etc. could potentially provide thousands of foot-pounds of energy. Could clock-tower designers have already figured this out? Maybe... Several websites make printable templates for cutting wooden gears at home.
Google mechanical timers, mechanical delays, and mechanical clocks to find a cheap way to time the space between activations. Rolling marbles, falling sand, dripping water, and melting ice can all give regular intervals. A tube filled with marbles may give 1 delay unit per marble. Sand always falls at 32-feet-per-second-per-second or 16 ounces per pound (1000 grams per kilogram).
If I was building one, I would just buy another Arduino($20), 2 air cylinders ($50), 2 air valves ($60), and a 1/2 gallon air tank ($35) to make one (~$200). To each, his own...
Resident timer maker.
Let’s make timers together!
Let’s make timers together!
- bound_jenny
- Moderator
- Posts: 10268
- Joined: 09 Dec 2007, 12:37
- Location: Montreal, Canada, Great Kinky North
Re: Crued Spanking / Whipping Machine ideas?
Hmmm... laying siege to someone's ass...
Jenny.
Jenny.
Helplessness is a doorway to the innermost reaches of the soul.
If my corset isn't tight, it just isn't right!
Kink is the spice of life!
Come to the Dark Side - we have cookies!
If my corset isn't tight, it just isn't right!
Kink is the spice of life!
Come to the Dark Side - we have cookies!
Re: Crued Spanking / Whipping Machine ideas?
GreenwichMistress wrote:Wow. That picture just got my mind racing... ok... take a broom handle and cut it to the proper size. Now get 2 long strips of vinyl or plastic. Cut slits in the bloom handle so the vinyl can slide right in, kinda like those old styrofoam airplanes. Then glue it in one it's even in the middle. Now start winding, as much as possible. To hold it there, we'd need something. I don't know what, but you could rig this holder to an ice timer that would drop and pull it away... thus making your bottom red.
The shaft of that paddle in the picture looks like a good idea. The other end does not have to be a motor. If you want to go out you only need to do is put he device under a tree. Attach a small pulley to an over hanging branch. Run the rope to a heavy bucket and then put the other end of the rope up and threw the pulley and back down to the machine. wrap the rope around the shaft. As you wrap the rope around the shaft the bucket will rise up to the branch. Position yourself and release the shaft. As the bucket drops you will get a paddling or whipping.
If you use a small double or triple pulley on the top and bottom the bucket will drop slower.
Now to find a way to delay the drop like a delayed release.
And the key to to get out could be in the bucket. Also with all the paddle's on the machine. Don't line them up or you will get hit in the same spot.
-
- ****
- Posts: 515
- Joined: 18 Nov 2012, 17:43
Re: Crued Spanking / Whipping Machine ideas?
There are some very interesting ideas in this thread! I've built perhaps a couple dozen different spanking machine designs, including three (four, if you count one that's a variation of another) commercially. My current offering (two, technically) was inspired by the device used on chimerabondage.com... in fact, I gave him a computer hand control as a thank you. See: http://www.orgasmalley.com/som/index.htm
For those looking to build a spanker, I would certainly suggest you consider pneumatics. The main components are widely available (Grainger, etc). This approach has MAJOR benefits:
1 - It's direct control, which means you can use it manually or easily computerize (via USB or a micro like Arduino).
2 - It's easy to change the power of each stroke, either by controlling the incoming air pressure or as I do, millisecond control over valve open time.
3 - As long as your frame is strong, you can get pretty much unlimited power.
4 - The "business end" can be very compact and light weight. A Spank-O-matic II head unit weighs about 8 pounds and fits in a shoebox. Of course, you do need a source of compressed air
What you cannot do effectively with a standard cylinder is a "whipping" style machine using a flexible end effector. This could be done pneumatically with a rotary actuator, but the approach loses many of the benefits. For that sort of machine, I strongly prefer a servo or stepper motor... similar to the Pain4fem machine but with actual computer control so it's not limited to a shoelace-style effector. You need the ability to change acceleration arc and profile to match a range of implements.
For those looking to build a spanker, I would certainly suggest you consider pneumatics. The main components are widely available (Grainger, etc). This approach has MAJOR benefits:
1 - It's direct control, which means you can use it manually or easily computerize (via USB or a micro like Arduino).
2 - It's easy to change the power of each stroke, either by controlling the incoming air pressure or as I do, millisecond control over valve open time.
3 - As long as your frame is strong, you can get pretty much unlimited power.
4 - The "business end" can be very compact and light weight. A Spank-O-matic II head unit weighs about 8 pounds and fits in a shoebox. Of course, you do need a source of compressed air
What you cannot do effectively with a standard cylinder is a "whipping" style machine using a flexible end effector. This could be done pneumatically with a rotary actuator, but the approach loses many of the benefits. For that sort of machine, I strongly prefer a servo or stepper motor... similar to the Pain4fem machine but with actual computer control so it's not limited to a shoelace-style effector. You need the ability to change acceleration arc and profile to match a range of implements.