What would you 3D print?

Ideas and instructions how you can make your own bondage toys.
User avatar
diyguy
**
Posts: 84
Joined: 21 Jan 2010, 16:43

What would you 3D print?

Post by diyguy »

Hello,

If you had a 3D printer (www.reprap.org), what would you print? Naughty-wise, ofcourse. :gag: :whip:

The material you would print with is ABS plastic: http://www.holisticwisdom.com/sex-toy-m ... lastic.htm

Diyguy
Do it yourself bondage stuff to get yourself in self bondage :D
tiemeupalso
****
Posts: 732
Joined: 19 Sep 2009, 19:03
Location: cameron/rockdale,tx
Contact:

Re: What would you 3D print?

Post by tiemeupalso »

a custom fit,fully enclosed sensory dep hood.breathing holes,but no eye or mouth holes.
aand a full body cast to lay in and would lock.
davisev5225
****
Posts: 579
Joined: 28 Aug 2007, 09:03

Re: What would you 3D print?

Post by davisev5225 »

3D printers can't go that large. :P

I'd make some custom-fit restraints, such as cuffs, gags, etc.
User avatar
bound_jenny
Moderator
Posts: 10268
Joined: 09 Dec 2007, 12:37
Location: Montreal, Canada, Great Kinky North

Re: What would you 3D print?

Post by bound_jenny »

If the 3D printer can't make them that large, make them in modules that lock together. Like a pervy erector set.

Jenny.
Helplessness is a doorway to the innermost reaches of the soul.
If my corset isn't tight, it just isn't right!
Kink is the spice of life!
Come to the Dark Side - we have cookies!
User avatar
diyguy
**
Posts: 84
Joined: 21 Jan 2010, 16:43

Re: What would you 3D print?

Post by diyguy »

Haha, this 3D printer can print 200x200x140 mm objects, full body casts are impossible in other words. You could make modules and bolt them together, but it would take a while, lol.

I'm thinking of a perfectly fitting posture collar.
Do it yourself bondage stuff to get yourself in self bondage :D
User avatar
bound_jenny
Moderator
Posts: 10268
Joined: 09 Dec 2007, 12:37
Location: Montreal, Canada, Great Kinky North

Re: What would you 3D print?

Post by bound_jenny »

diyguy wrote:this 3D printer can print 200x200x140 mm objects,
Pity. I was thinking of a completely rigid corset... :drool:

Jenny.
Helplessness is a doorway to the innermost reaches of the soul.
If my corset isn't tight, it just isn't right!
Kink is the spice of life!
Come to the Dark Side - we have cookies!
lianray
*
Posts: 29
Joined: 02 Apr 2012, 14:30

Re: What would you 3D print?

Post by lianray »

After looking up a bit on this kind of plastic, it's going to be fairly rigid, light and not flexible.

Would be cool to make all kinds of made to measure restraints. Will be a fun thing explaining it to the company though ^^.
My personal favorite would be something similar to Reinholds chastity belt, since they stopped producing.
mrblueeyes2
**
Posts: 61
Joined: 17 Jul 2011, 01:30
Location: Texas

Re: What would you 3D print?

Post by mrblueeyes2 »

I know exactly what I would do. I would make my own chastity device. Custom fit to make sure it does not come off.

Mr B
User avatar
Blacky
****
Posts: 601
Joined: 01 Sep 2011, 15:07
Contact:

Re: What would you 3D print?

Post by Blacky »

I was just wondering whether it would be possible to print parts for a larger printer that then again would be able to print e.g. a corset :?

The second thing I thought of was printing cases for smd-circuits. The diameter should be equal to the outer diameter of AA-Batteries (for obvious reasons). Imagine a vibrator that turns itself on and of in a random pattern with random intensities WITHOUT external cases, cables and stuff... sooo much fun.... :twisted:
If the doors of perception were cleansed everything would appear to man as it is, infinite. (W. Blake)
User avatar
bound_jenny
Moderator
Posts: 10268
Joined: 09 Dec 2007, 12:37
Location: Montreal, Canada, Great Kinky North

Re: What would you 3D print?

Post by bound_jenny »

Blacky wrote:Imagine a vibrator that turns itself on and of in a random pattern with random intensities WITHOUT external cases, cables and stuff... sooo much fun.... :twisted:
I had that accidentally when some battery contact corrosion in one of my vibes made it run randomly - on, off, slow, fast... drove me nuts - in a good way... :D

Jenny.
Helplessness is a doorway to the innermost reaches of the soul.
If my corset isn't tight, it just isn't right!
Kink is the spice of life!
Come to the Dark Side - we have cookies!
User avatar
LoKiT
Retired Moderator
Posts: 372
Joined: 12 Apr 2010, 01:07

Re: What would you 3D print?

Post by LoKiT »

I think it has to be the perfectly fitting CB600 or similar :idea:
Something that doesn't feel like its cutting your nuts off a few hours!
... or perhaps that the idea? Or with a built in remote controlled bullet vibe?
Just so your Mistress can humiliate when you least expect it in a public place :twisted:

There is proberbly a market for made to measure :D
User avatar
ponylady
Moderator
Posts: 3822
Joined: 26 Dec 2007, 20:52
Location: germany
Contact:

Re: What would you 3D print?

Post by ponylady »

this thread has been going on for awhile and nobody mentioned it yet:

this stuff is called RPT for RapidProtoTyping, and nobody has to build or purchase a printer.
all you need to do to get that customfit rigid corset *shameless plug for jenny :roll: *
is to make your own RIP-able file and ask your nearest RPT-supplier for a rate.

this is still not mainstream technology, so you will have to expect rates that are comparable
with the purchase of the latest apple-product.
:roll: :roll: :roll:

talking about apple: they wanted to get big in the children toys markets, but had to make
a sudden exit. anybody knows why ?
[
Jadit
****
Posts: 531
Joined: 24 Oct 2010, 23:49
Location: Finland

Re: What would you 3D print?

Post by Jadit »

I would print chastity device similar to this:
http://www.extremerestraints.com/images/VF145z.jpg
Without spikes, 0.5mm wider diameter and rounded rings. That way it won't feel like a device meant to destroy the genitals... I wore the real thing but threw to garbage already, it was dangerous.
andy
*
Posts: 1
Joined: 02 May 2012, 17:40

Re: What would you 3D print?

Post by andy »

I actually have a 3D printer already (2 in fact).

If people are interested, I'm happy to print bits for a reasonable price. There are limitations you have to take into account with the materials and design, but they are still fabulious devices.

I'm also quite skilled at electronics design, at least to the hobbyist level, and am happy to design and sell some full products if people are interested.
G4K-DK
**
Posts: 50
Joined: 11 Feb 2010, 13:52
Location: DK

Re: What would you 3D print?

Post by G4K-DK »

You should all go back to printing whistles and octopuses :P
Post Reply