What would you 3D print?
What would you 3D print?
Hello,
If you had a 3D printer (www.reprap.org), what would you print? Naughty-wise, ofcourse.
The material you would print with is ABS plastic: http://www.holisticwisdom.com/sex-toy-m ... lastic.htm
Diyguy
If you had a 3D printer (www.reprap.org), what would you print? Naughty-wise, ofcourse.
The material you would print with is ABS plastic: http://www.holisticwisdom.com/sex-toy-m ... lastic.htm
Diyguy
Do it yourself bondage stuff to get yourself in self bondage
-
- ****
- Posts: 732
- Joined: 19 Sep 2009, 19:03
- Location: cameron/rockdale,tx
- Contact:
Re: What would you 3D print?
a custom fit,fully enclosed sensory dep hood.breathing holes,but no eye or mouth holes.
aand a full body cast to lay in and would lock.
aand a full body cast to lay in and would lock.
-
- ****
- Posts: 579
- Joined: 28 Aug 2007, 09:03
Re: What would you 3D print?
3D printers can't go that large.
I'd make some custom-fit restraints, such as cuffs, gags, etc.
I'd make some custom-fit restraints, such as cuffs, gags, etc.
- bound_jenny
- Moderator
- Posts: 10268
- Joined: 09 Dec 2007, 12:37
- Location: Montreal, Canada, Great Kinky North
Re: What would you 3D print?
If the 3D printer can't make them that large, make them in modules that lock together. Like a pervy erector set.
Jenny.
Jenny.
Helplessness is a doorway to the innermost reaches of the soul.
If my corset isn't tight, it just isn't right!
Kink is the spice of life!
Come to the Dark Side - we have cookies!
If my corset isn't tight, it just isn't right!
Kink is the spice of life!
Come to the Dark Side - we have cookies!
Re: What would you 3D print?
Haha, this 3D printer can print 200x200x140 mm objects, full body casts are impossible in other words. You could make modules and bolt them together, but it would take a while, lol.
I'm thinking of a perfectly fitting posture collar.
I'm thinking of a perfectly fitting posture collar.
Do it yourself bondage stuff to get yourself in self bondage
- bound_jenny
- Moderator
- Posts: 10268
- Joined: 09 Dec 2007, 12:37
- Location: Montreal, Canada, Great Kinky North
Re: What would you 3D print?
Pity. I was thinking of a completely rigid corset...diyguy wrote:this 3D printer can print 200x200x140 mm objects,
Jenny.
Helplessness is a doorway to the innermost reaches of the soul.
If my corset isn't tight, it just isn't right!
Kink is the spice of life!
Come to the Dark Side - we have cookies!
If my corset isn't tight, it just isn't right!
Kink is the spice of life!
Come to the Dark Side - we have cookies!
Re: What would you 3D print?
After looking up a bit on this kind of plastic, it's going to be fairly rigid, light and not flexible.
Would be cool to make all kinds of made to measure restraints. Will be a fun thing explaining it to the company though ^^.
My personal favorite would be something similar to Reinholds chastity belt, since they stopped producing.
Would be cool to make all kinds of made to measure restraints. Will be a fun thing explaining it to the company though ^^.
My personal favorite would be something similar to Reinholds chastity belt, since they stopped producing.
-
- **
- Posts: 61
- Joined: 17 Jul 2011, 01:30
- Location: Texas
Re: What would you 3D print?
I know exactly what I would do. I would make my own chastity device. Custom fit to make sure it does not come off.
Mr B
Mr B
Re: What would you 3D print?
I was just wondering whether it would be possible to print parts for a larger printer that then again would be able to print e.g. a corset
The second thing I thought of was printing cases for smd-circuits. The diameter should be equal to the outer diameter of AA-Batteries (for obvious reasons). Imagine a vibrator that turns itself on and of in a random pattern with random intensities WITHOUT external cases, cables and stuff... sooo much fun....
The second thing I thought of was printing cases for smd-circuits. The diameter should be equal to the outer diameter of AA-Batteries (for obvious reasons). Imagine a vibrator that turns itself on and of in a random pattern with random intensities WITHOUT external cases, cables and stuff... sooo much fun....
If the doors of perception were cleansed everything would appear to man as it is, infinite. (W. Blake)
- bound_jenny
- Moderator
- Posts: 10268
- Joined: 09 Dec 2007, 12:37
- Location: Montreal, Canada, Great Kinky North
Re: What would you 3D print?
I had that accidentally when some battery contact corrosion in one of my vibes made it run randomly - on, off, slow, fast... drove me nuts - in a good way...Blacky wrote:Imagine a vibrator that turns itself on and of in a random pattern with random intensities WITHOUT external cases, cables and stuff... sooo much fun....
Jenny.
Helplessness is a doorway to the innermost reaches of the soul.
If my corset isn't tight, it just isn't right!
Kink is the spice of life!
Come to the Dark Side - we have cookies!
If my corset isn't tight, it just isn't right!
Kink is the spice of life!
Come to the Dark Side - we have cookies!
Re: What would you 3D print?
I think it has to be the perfectly fitting CB600 or similar
Something that doesn't feel like its cutting your nuts off a few hours!
... or perhaps that the idea? Or with a built in remote controlled bullet vibe?
Just so your Mistress can humiliate when you least expect it in a public place
There is proberbly a market for made to measure
Something that doesn't feel like its cutting your nuts off a few hours!
... or perhaps that the idea? Or with a built in remote controlled bullet vibe?
Just so your Mistress can humiliate when you least expect it in a public place
There is proberbly a market for made to measure
Re: What would you 3D print?
this thread has been going on for awhile and nobody mentioned it yet:
this stuff is called RPT for RapidProtoTyping, and nobody has to build or purchase a printer.
all you need to do to get that customfit rigid corset *shameless plug for jenny *
is to make your own RIP-able file and ask your nearest RPT-supplier for a rate.
this is still not mainstream technology, so you will have to expect rates that are comparable
with the purchase of the latest apple-product.
talking about apple: they wanted to get big in the children toys markets, but had to make
a sudden exit. anybody knows why ?
this stuff is called RPT for RapidProtoTyping, and nobody has to build or purchase a printer.
all you need to do to get that customfit rigid corset *shameless plug for jenny *
is to make your own RIP-able file and ask your nearest RPT-supplier for a rate.
this is still not mainstream technology, so you will have to expect rates that are comparable
with the purchase of the latest apple-product.
talking about apple: they wanted to get big in the children toys markets, but had to make
a sudden exit. anybody knows why ?
[
Re: What would you 3D print?
I would print chastity device similar to this:
http://www.extremerestraints.com/images/VF145z.jpg
Without spikes, 0.5mm wider diameter and rounded rings. That way it won't feel like a device meant to destroy the genitals... I wore the real thing but threw to garbage already, it was dangerous.
http://www.extremerestraints.com/images/VF145z.jpg
Without spikes, 0.5mm wider diameter and rounded rings. That way it won't feel like a device meant to destroy the genitals... I wore the real thing but threw to garbage already, it was dangerous.
Re: What would you 3D print?
I actually have a 3D printer already (2 in fact).
If people are interested, I'm happy to print bits for a reasonable price. There are limitations you have to take into account with the materials and design, but they are still fabulious devices.
I'm also quite skilled at electronics design, at least to the hobbyist level, and am happy to design and sell some full products if people are interested.
If people are interested, I'm happy to print bits for a reasonable price. There are limitations you have to take into account with the materials and design, but they are still fabulious devices.
I'm also quite skilled at electronics design, at least to the hobbyist level, and am happy to design and sell some full products if people are interested.
Re: What would you 3D print?
You should all go back to printing whistles and octopuses