Creative Arduino Usage
Posted: 15 Apr 2010, 14:22
Hi people,
Several days ago I ordered an Arduino online which should come in in a couple of days. If you don;t know what an arduino is: http://www.arduino.cc. It's a micro controller board designed with several input and output mechanisms. I bought it because I want to try and make a robotic arm. As it comes in in a couple of days in constantly thinking of ways to build it.
However, today I lay in bondage (spreadeagle with legs tied together instead of apart) and had this wonderful moment! You can use the arduino for muuuch more
Fun starts here!
I ordered a starters kit which gives me plenty of sensors and stuff. So i started brainstorming
Idea #1
Very simple: a servo or motor holding a cup upright. Keys to release yourself are placed inside the cup. The arduino is programmed to let the motor or servo spin 180 degrees after a pre-defined or random amount of time. turning the makes the cup turn thus dropping the keys!
Idea #2
make a very small electro magnet. (Like: http://education.jlab.org/qa/electromagnet.html) connect this to the arduino and let it unpower the electro magnet after a certain amount of time. Making the keys, you stuck to the magnet drop.
Idea #3
Using a photocell (measures light intensity) placed in such a way it is in shadows. When the sun turns light will reach other places and fall onto the photocell (IF placed correctly). The photocell can then give a signal to drop the keys using, for instance, one of the above mechanisms
Idea #4
This one is harder (but more fun ). Make yourself a dildo any preferred way (for ideas, search). Implement in the dildo a photocell at like 7? 10? 15? cm from the tip of the dildo. Make sure the photo resistor can't be harmed from you practising blow jobs on the dildo. For instance place clear tape or foil over the photocell. The idea is that when you don't have the dildo in your mouth the photocell measures a bright light intensity. When you blow job the dildo you'll need to cover the dildo far enough to cover the photocell. Covering the photocell will make it register darkness. You then program the arduino to measure the amount of times it switched between light and dark. After a certain amount of blows (?? how would I call this in English, lol) a release mechanism is activated.
It's not done yet!
I have more sensors I can use! I just don't have good ideas yet to use them, how would you use them?
Included are: A photocell (light / dark), A thermistor (measuring temperature), a force sensitive resistor (measures the amount of force when pressed on it) and a small microphone (measure sound intensity)
Please get creative and help me think of more evil ways to release myself
Diy Guy
P.S. Always use a backup release when you try this, electronics are electronics and can fail!
Several days ago I ordered an Arduino online which should come in in a couple of days. If you don;t know what an arduino is: http://www.arduino.cc. It's a micro controller board designed with several input and output mechanisms. I bought it because I want to try and make a robotic arm. As it comes in in a couple of days in constantly thinking of ways to build it.
However, today I lay in bondage (spreadeagle with legs tied together instead of apart) and had this wonderful moment! You can use the arduino for muuuch more
Fun starts here!
I ordered a starters kit which gives me plenty of sensors and stuff. So i started brainstorming
Idea #1
Very simple: a servo or motor holding a cup upright. Keys to release yourself are placed inside the cup. The arduino is programmed to let the motor or servo spin 180 degrees after a pre-defined or random amount of time. turning the makes the cup turn thus dropping the keys!
Idea #2
make a very small electro magnet. (Like: http://education.jlab.org/qa/electromagnet.html) connect this to the arduino and let it unpower the electro magnet after a certain amount of time. Making the keys, you stuck to the magnet drop.
Idea #3
Using a photocell (measures light intensity) placed in such a way it is in shadows. When the sun turns light will reach other places and fall onto the photocell (IF placed correctly). The photocell can then give a signal to drop the keys using, for instance, one of the above mechanisms
Idea #4
This one is harder (but more fun ). Make yourself a dildo any preferred way (for ideas, search). Implement in the dildo a photocell at like 7? 10? 15? cm from the tip of the dildo. Make sure the photo resistor can't be harmed from you practising blow jobs on the dildo. For instance place clear tape or foil over the photocell. The idea is that when you don't have the dildo in your mouth the photocell measures a bright light intensity. When you blow job the dildo you'll need to cover the dildo far enough to cover the photocell. Covering the photocell will make it register darkness. You then program the arduino to measure the amount of times it switched between light and dark. After a certain amount of blows (?? how would I call this in English, lol) a release mechanism is activated.
It's not done yet!
I have more sensors I can use! I just don't have good ideas yet to use them, how would you use them?
Included are: A photocell (light / dark), A thermistor (measuring temperature), a force sensitive resistor (measures the amount of force when pressed on it) and a small microphone (measure sound intensity)
Please get creative and help me think of more evil ways to release myself
Diy Guy
P.S. Always use a backup release when you try this, electronics are electronics and can fail!