Spanking machine
-
- *
- Posts: 2
- Joined: 14 May 2018, 19:22
Re: Spanking machine
I really like the idea of your selfmade spanking machine. Could you please post a video of the mechanisms of the machine to better understand your construction?
I really love my Sexmaschine
Re: Spanking machine
Since i can't upload videos here (or did i miss something?) i have added one to my blog: http://owned-by-princess-shelle.blogspo ... l-box.htmlmaster-germany wrote:I really like the idea of your selfmade spanking machine. Could you please post a video of the mechanisms of the machine to better understand your construction?
It's at the very bottom of the page...
maid marta, Collared property of Domina Shelle Rivers and Lady Helena
https://twitter.com/ShellesPuppy
my blog: https://owned-by-princess-shelle.blogspot.com
my art: https://maid-marta.bdsmlr.com
https://twitter.com/ShellesPuppy
my blog: https://owned-by-princess-shelle.blogspot.com
my art: https://maid-marta.bdsmlr.com
Re: Spanking machine
Ouch. That looks like fun. Thanks for posing a video.
Re: Spanking machine
Wow, are you an engineer or something? I could never build anything like that
Greetings from Finland btw
Greetings from Finland btw
Re: Spanking machine
Interesting idea.
But i would have used a two motor system. A linear actuator to adjust the strength and a speed controlled motor for hit frequency.
But i would have used a two motor system. A linear actuator to adjust the strength and a speed controlled motor for hit frequency.
Indeed over time people got knowledge but no wisdom.
Accidents do not happen, they are caused.
Accidents do not happen, they are caused.
Re: Spanking machine
You mean with a cam that moves the attachment? I have thought about that, but that would limit the angle the cane moves. You would need way more strength to accelerate it over the short distance.
maid marta, Collared property of Domina Shelle Rivers and Lady Helena
https://twitter.com/ShellesPuppy
my blog: https://owned-by-princess-shelle.blogspot.com
my art: https://maid-marta.bdsmlr.com
https://twitter.com/ShellesPuppy
my blog: https://owned-by-princess-shelle.blogspot.com
my art: https://maid-marta.bdsmlr.com
Re: Spanking machine
Well, if you build according to my sketch, the angle would be 30°. Just by moving the pivot point of the cam disc southwards you can increase the angle up to 45°.occorics wrote:I have thought about that, but that would limit the angle the cane moves. You would need way more strength to accelerate it over the short distance.
I think, by changing the length of the lever and the diameter of the cam disc, you could increase the angle even more.
Regarding strength, well, there are 300 lbs linear actuators available but i've also seen a heavy duty one with 1200 lbs.
Indeed over time people got knowledge but no wisdom.
Accidents do not happen, they are caused.
Accidents do not happen, they are caused.
-
- *
- Posts: 29
- Joined: 24 May 2018, 05:46
Re: Spanking machine
Use a carbon fiber arrow shaft.
Re: Spanking machine
Bad idea imho. They are not made for sideways loading, and when they break they produce super sharp fibers.o0_Squirrel_0o wrote:Use a carbon fiber arrow shaft.
How may I serve you? *Curtsey*
Re: Spanking machine
if you are looking for a long-lasting cane, I can recommend (from very personal experience) Delrin a.k.a. acetal rod. It is available in a variety of diameters, it is easily cut with ordinary saws, produces no fibres and blood easily wipes off
It will not fracture and is very whippy when the diameter is small, very thuddy when you get to 12mm
It will not fracture and is very whippy when the diameter is small, very thuddy when you get to 12mm
be a switch, double the fun
Re: Spanking machine
yes, Delrin is perfect!
The rod in the video clip is 6mm Delrin at 50% strength. For my machine, it turned out to be the size that works/hurts best.
The rod in the video clip is 6mm Delrin at 50% strength. For my machine, it turned out to be the size that works/hurts best.
maid marta, Collared property of Domina Shelle Rivers and Lady Helena
https://twitter.com/ShellesPuppy
my blog: https://owned-by-princess-shelle.blogspot.com
my art: https://maid-marta.bdsmlr.com
https://twitter.com/ShellesPuppy
my blog: https://owned-by-princess-shelle.blogspot.com
my art: https://maid-marta.bdsmlr.com
-
- *
- Posts: 2
- Joined: 14 May 2018, 19:22
Re: Spanking machine
Thanks a lot for posting all the information
Very nice work
Very nice work
I really love my Sexmaschine
Re: Spanking machine
last time Lady Helena used the spanking-machine on me, it didn't work perfectly, which earned me an extra punishment...
needless to say, that i was very motivated to improve the reliability...
while i was trying to increase the torque of the stepper-motor, the driver-circuit went up in smoke... (i love the smell of burnt electronics in the morning! )
I replaced it by a microprocessor-driven model... I had not expected, how much better the motor runs with it. More torque and a lot less noise...
I also did some fixes in the software, now it arms twice as fast and due to a better timing, it also hits a bit harder.
During my test with the new setup, I ramped up from 20% to 55% within around 30 strokes. Because it always hit the same area, my skin had started to break, so i stopped.
I needed a solution to vary the height...
Luckily, i found a motorcycle-lift that had the perfect size to mount the spanking-machine on. I mounted another stepper-motor to the crank shaft and now it can be moved up and down automatically by about 25cm...
It's quite heavy now, but that also means that i don't have to fasten it to a fixed point to prevent it from moving around when the stroke is released...
Friday will be the official test-drive... unless Lady Helena is in the mood to do something else...
needless to say, that i was very motivated to improve the reliability...
while i was trying to increase the torque of the stepper-motor, the driver-circuit went up in smoke... (i love the smell of burnt electronics in the morning! )
I replaced it by a microprocessor-driven model... I had not expected, how much better the motor runs with it. More torque and a lot less noise...
I also did some fixes in the software, now it arms twice as fast and due to a better timing, it also hits a bit harder.
During my test with the new setup, I ramped up from 20% to 55% within around 30 strokes. Because it always hit the same area, my skin had started to break, so i stopped.
I needed a solution to vary the height...
Luckily, i found a motorcycle-lift that had the perfect size to mount the spanking-machine on. I mounted another stepper-motor to the crank shaft and now it can be moved up and down automatically by about 25cm...
It's quite heavy now, but that also means that i don't have to fasten it to a fixed point to prevent it from moving around when the stroke is released...
Friday will be the official test-drive... unless Lady Helena is in the mood to do something else...
maid marta, Collared property of Domina Shelle Rivers and Lady Helena
https://twitter.com/ShellesPuppy
my blog: https://owned-by-princess-shelle.blogspot.com
my art: https://maid-marta.bdsmlr.com
https://twitter.com/ShellesPuppy
my blog: https://owned-by-princess-shelle.blogspot.com
my art: https://maid-marta.bdsmlr.com
Re: Spanking machine
Wow your work is really amazing... i only realized a Web Control for my Tens and the inflatable Buttplug... never would be able to do such a complex Control Unit
- bound_jenny
- Moderator
- Posts: 10268
- Joined: 09 Dec 2007, 12:37
- Location: Montreal, Canada, Great Kinky North
Re: Spanking machine
It is amazing indeed!
Kinky people often are among the most inventive engineers.
It makes one ponder whether engineers are more likely to be kinky...
Jenny.
Kinky people often are among the most inventive engineers.
It makes one ponder whether engineers are more likely to be kinky...
Jenny.
Helplessness is a doorway to the innermost reaches of the soul.
If my corset isn't tight, it just isn't right!
Kink is the spice of life!
Come to the Dark Side - we have cookies!
If my corset isn't tight, it just isn't right!
Kink is the spice of life!
Come to the Dark Side - we have cookies!