I want to make spanking machines?

Ideas and instructions how you can make your own bondage toys.
Post Reply
restricted
****
Posts: 882
Joined: 23 Aug 2011, 09:33

I want to make spanking machines?

Post by restricted »

I am buying an electromagnet and a timer to hold the chains so I am held tightly spread-eagled between two walls.

I want to be able to move the magnet so it won't be found by anyone.

One thing I'd like to do is to chain myself over a stool and want to make a spanking machine ( a paddle ?) that I can set up on myself. It needs to start up and stop randomly and automatically. Any ideas?
Last edited by Sir Cumference on 08 Dec 2017, 20:25, edited 1 time in total.
Reason: Headline improvement
We have ways of making you happily suffer. You WILL enjoy yourself. That's an order.
User avatar
Sir Cumference
Moderator
Posts: 1606
Joined: 29 Jan 2012, 22:00
Location: Scandinavia

Re: I want to make spanking machines?

Post by Sir Cumference »

restricted wrote:..... Any ideas?
Try the search function?
~ Leatherworking, blacksmithing , woodworking and programming are the most pervertable skills you can learn! ~
User avatar
occorics
***
Posts: 368
Joined: 31 May 2016, 12:46
Location: Germany
Contact:

Re: I want to make spanking machines?

Post by occorics »

Here's a rough schematic of one i once built:
flowRoot3398.png
Here's how it works:
- in the armed position, the arm is held by the electromagnet
- the winch tightens rubber band 1 (bungee cord or similar) to the desired strength
- the electromagnet is switched off to deliver the stroke
- after the stroke, the magnet get's turned on again and the winch reverses to release rubber band 1
- rubber band 2 (normal household rubber band) draws the arm back
- when the magnet catches the arm (detected by a switch), the winch reverses and tightens rubber band 1 again

i used a normal gear motor and adjusted the stroke strength based on the time it was running, but a stepper-motor would be more precise.
i had the problem, that the rubber band tended to skip off the wheel, but that should be solvable. i have a cheap commercial spanking-machine now (http://www.spankermachine.com), but i'd like something stronger and might build this system again. I'll post instructions if i do...
maid marta, Collared property of Domina Shelle Rivers and Lady Helena

https://twitter.com/ShellesPuppy
my blog: https://owned-by-princess-shelle.blogspot.com
my art: https://maid-marta.bdsmlr.com
lj
Moderator
Posts: 2255
Joined: 14 Oct 2008, 18:22
Location: East Anglia, UK

Re: I want to make spanking machines?

Post by lj »

I also experimented with a home-built spanking machine.

I used a 12volt DC electric motor and a control system that applied 24 volts (for extra force! )to the motor, with position sensors (Hall effect) to fix the "home" and "strike" positions. The motor was fed a reverse current to bring the paddle to the "home" position, with a weak permanent magnet to hold the paddle in place. When the motor was given the full 24 volts, it spun rapidly away from home, with power being switched off when it reached the "strike" sensor. By then it had enough momentum to whip the paddle (or cane) onto the target whilst not stalling the motor. The whole lot was controlled with a microprocessor (PIC) and applied a random number of strikes, at random intervals, sounding a buzzer as the paddle started its strike, and released the restraints after a random time.

It was very effective, but I much prefer it when a nice lady is holding the cane and applying it in her own special way!
be a switch, double the fun :-)
Post Reply