www.BoundAnna.com

sbdx wrote:Very nice work!

Would you be willing to share the details of how you are using the Raspberry Pi to control the motor on your F-machine? This is something I've wanted to do for awhile, but am not quite sure how to go about it.

I would appreciate any help you might be willing to offer!

I'm using a PWM controller board (DROK 200085). Instead of the potentiometer, I use a chip with an analogue output (PCF8591) to provide the 0-5V control voltage. It's connected to the I2C pins of the RaspberryPi.
On the PCF8591, there are no external parts needed, just connect the unused inputs to ground. Programming it is done by sending two bytes, one to enable the output (01000000 (the other bits are for controlling the inputs)) and one to control the output voltage.

That was the sound of the light bulb coming on. Makes perfect sense, thank you!

guess what i added this weekend...
correct, an internet controlled squirting dildo.
The lube is a little bit too thick, though. But water with a little bit of it for the taste works great!
here's a video of it in action:
https://twitter.com/ShellesPuppy/status ... 8617678849