spreading pants with toy holder

Ideas and instructions how you can make your own bondage toys.
Post Reply
User avatar
smelt
**
Posts: 163
Joined: 30 Jun 2017, 17:16
Location: USA

spreading pants with toy holder

Post by smelt »

I had posted about making a pair of these... Well, I got started. Heres some pics and a short description. The pics were taken as I did it, but some may show parts that were done later,I didnt want to keep uploading as I went, but you will get the idea

I made a cardboard template, after measuring roughly how wide I could spread my legs. I compared that to the dimensions for the commercially made spreaders, and it was really close. So I went with it. Just traced out the basic shape on a box, and X-acto-knifed it out:
Image


After that, I tried it out a couple times, to feel out how it would be. Seemed OK, so I designed my cutout for crotch access/ toy holder. (Without this, it would be a pretty effective chastity toy as well...):
Image

That seemed good, so it was time to break out the sheet metal. And the tin snips. Then my hand hurt from snipping after 11 inches, so it was time for the plasma cutter. Not as smooth, but they will have 2 kinds of trim on them to cover the cuts anyway. :
Image

Added some automotive edging trim, and gave them a quick try, laying down. I used my trusty bondage belt to hold them in place, and was amazed at how they work already. No pics of them on me yet, but here is the prototype so far, the access cutout isn't made, but is laid out:
Image

It sort of looks like a big, wide chastity belt at this point. It pretty much is, I guess.:
Image


I will be using heavy rubber strapping for the waist and shoulder bands, as well as the wrist and ankle restraints. And a pair of pool noodles for the padding on the sides. The final one will be covered in brown faux leather, with black PVC and rubber trim. The toy holder will be an aluminum bar, 1/2" thick, with adjustable holes for placement. If the rubber straps don't do what I'm looking for, I have a lot of stainess steel strips, that WILL be secure. I just might order a 10 pack of the segufix magnetic locks, and outfit the final product with them. Although, it wont be possible to reach the buckles with the wrist restraints on, but those locks are amazing. Computer locking bolts would be great as well, but not as quick to apply. I'm going to grab some lunch, and continue this little operation after I eat. I should have a working prototype tomorrow around this same time...
User avatar
smelt
**
Posts: 163
Joined: 30 Jun 2017, 17:16
Location: USA

Re: spreading pants with toy holder

Post by smelt »

Edit: Should have made it more clear. The picture here is what I HOPE to accomplish with my harness!

OK, so who stole my 2 piece rivets? I can't find them anywhere, and can't continue until I find them, or get them back. I never lose things (ask my Wife) haha... so they must be stolen. Anyway, that's where I'm at. Spent 2 hours looking for a small container of hardware. I did find a nice roll of red medical silicone, that would make a great liner. I knew I had some, but forgot about this stuff, its really smooth. And found some stainless rod for the toy holder itself. Now I just need to fire up my bench grinder, and smooth out the sides so the trim sits good. I wish I had done this years ago, when I first saw these things. So this is what I am hoping to accomplish with the 2nd pair:
Image
Last edited by smelt on 16 Aug 2017, 14:19, edited 1 time in total.
User avatar
bound_jenny
Moderator
Posts: 10268
Joined: 09 Dec 2007, 12:37
Location: Montreal, Canada, Great Kinky North

Re: spreading pants with toy holder

Post by bound_jenny »

That looks like one nasty piece of kit... :shock:

Nice work, and I like the added touch of the edging trim.

Jenny.
Helplessness is a doorway to the innermost reaches of the soul.
If my corset isn't tight, it just isn't right!
Kink is the spice of life!
Come to the Dark Side - we have cookies!
User avatar
Keyless
***
Posts: 344
Joined: 22 Dec 2013, 12:33

Re: spreading pants with toy holder

Post by Keyless »

That looks like a really nice piece of work. Should be fun - as long as your hip joints are in good condition!
User avatar
smelt
**
Posts: 163
Joined: 30 Jun 2017, 17:16
Location: USA

Re: spreading pants with toy holder

Post by smelt »

Thanks for the positive comments so far. (-----Just so everyone knows, the picture with the model is not mine! I'm hoping my harness comes out similar...-----) But wait til you see where this ends up.. haha. The thick foam side trim will be added this evening (I am kind of not able to go up and down stairs til this afternoon... house cleaning day..) The straps will start out as the rubber strapping I talked about earlier, I have a few hundred feet of it out in the shed. (Which I can't really get to right now either.. should have thought this out before my Wife left for work with the keys to my outfit...). Anyway- I'm working on a locking design using milled out, pass-thru metal blocks and computer locking bolts to hold the "suspenders" in place. I think they should cross, and form an "X" in the front and back for security. Or use the chest strap like on the yellow one.

After looking at that yellow harness, I see that the crotch opening in my set may not be big enough for "easy access", I may have to enlarge it in the final piece. But that's why I'm building a quick one, just to try it out, and see where it ends up. I am also kind of leaning away from the faux leather covering, it would be one more glue joint to fail. I wish my oven was big enough, they would be powder coated hot pink with shiny black PVC trim...
gogglestars2
*
Posts: 26
Joined: 28 Mar 2013, 07:38

Re: spreading pants with toy holder

Post by gogglestars2 »

I can't see any of the images :-(
I guess imgur did it's usual "remove things that might be porn" again.
Not sure what a good image host is for things like that.
Post Reply