Spanking machines.
Posted: 13 Dec 2007, 12:34
Lately I've been mulling over in my head the plans for a spanking machine, one that can be used by a Dom on a sub, but also one that can be used alone by someone into self bondage.
The more I think about the device, the more detailed the plans in my head become. That's usually the case when an idea for something to build comes to me. I plan it out for a long time and then set it down on paper so I can build it. I build furniture as a hobby you see, and my idea calls for a device mostly made out of wood, complete with a spanking bench to be locked to and a keylock device for someone wanting to force themselves to take a spanking.
Anyone interested so far?
The device would run on a slow speed electric motor, that would turn a cam that would in turn pull back and release the spanking arm. I have an idea for a variable speed dial that would give it some range.
I also have an idea for a gear I can put into it that would turn a counter that would stop the machine at a certain point. That way you could preset the machine to give a set number of spanks.
The machine would be attached to its own spanking bench, the easiest part of the build in my opinion. But this would allow for other wiring. The hand rests, for example. It would be very easy to include a couple of hold down switches that would have to be pressed for the machine to run at all. So the person strapped down would have some control over the machine. Imagine, you are strapped in for fifty strikes, but you have control over how fast you want to take them.
I also have a plan in my head for a key release box that would lock closed for as long as the machine has power and is turned on. It would open automatically when the counter hits zero, allowing someone on their own to use the machine and be forced to take the entire spanking programmed into it. The safety would be that if for any reason the power goes off, the magnet holding the lid shut would no longer be able to do so.
Hell, I even have an idea how to make the height of the bench adjustable.
Now, I know about the Robospanker. It apparently is the only spanking machine on the market unless you know of any others.
So maybe if the plans come together and I build my prototype I might go into production on a "build by order" system.
I think I could do the thing for a lot cheaper than the Robospanker, although I have yet to do any real research on the hardware.
It would also have to be an "assemble at home" thing for easy shipping, something to think about when designing the bench.
So what I'm asking is, does this project of mine strike any interest in anyone?
The Robospanker retails for $1000, mine would probably be half that at the most. So given the right price do you think something like this would sell?
Any input would be good.
Thanks!
The more I think about the device, the more detailed the plans in my head become. That's usually the case when an idea for something to build comes to me. I plan it out for a long time and then set it down on paper so I can build it. I build furniture as a hobby you see, and my idea calls for a device mostly made out of wood, complete with a spanking bench to be locked to and a keylock device for someone wanting to force themselves to take a spanking.
Anyone interested so far?
The device would run on a slow speed electric motor, that would turn a cam that would in turn pull back and release the spanking arm. I have an idea for a variable speed dial that would give it some range.
I also have an idea for a gear I can put into it that would turn a counter that would stop the machine at a certain point. That way you could preset the machine to give a set number of spanks.
The machine would be attached to its own spanking bench, the easiest part of the build in my opinion. But this would allow for other wiring. The hand rests, for example. It would be very easy to include a couple of hold down switches that would have to be pressed for the machine to run at all. So the person strapped down would have some control over the machine. Imagine, you are strapped in for fifty strikes, but you have control over how fast you want to take them.
I also have a plan in my head for a key release box that would lock closed for as long as the machine has power and is turned on. It would open automatically when the counter hits zero, allowing someone on their own to use the machine and be forced to take the entire spanking programmed into it. The safety would be that if for any reason the power goes off, the magnet holding the lid shut would no longer be able to do so.
Hell, I even have an idea how to make the height of the bench adjustable.
Now, I know about the Robospanker. It apparently is the only spanking machine on the market unless you know of any others.
So maybe if the plans come together and I build my prototype I might go into production on a "build by order" system.
I think I could do the thing for a lot cheaper than the Robospanker, although I have yet to do any real research on the hardware.
It would also have to be an "assemble at home" thing for easy shipping, something to think about when designing the bench.
So what I'm asking is, does this project of mine strike any interest in anyone?
The Robospanker retails for $1000, mine would probably be half that at the most. So given the right price do you think something like this would sell?
Any input would be good.
Thanks!