DIY fiddle

Ideas and instructions how you can make your own bondage toys.

Re: DIY fiddle

Postby freddylocks » 23 Feb 2015, 22:31

I would say that the parts would be too large to print on most 3d printers.

Having destroyed several 3d prints recently, I would say that it could be quite dangerous. Often when large pieces break, they leave jagged edges, this is not good when you have neck and wrists involved.

When it comes to making clamps and such like then it is a different matter, 3d printing can produce some great styles, e.g. a device that holds the labia open and then has clit clip built in (hygene precautions should be taken, for abs I use a vapour bath to smooth the abs and help create a surface that can be cleaned (just like Lego))

Cheers
Freddy
freddylocks
*
 
Posts: 28
Joined: 19 Aug 2012, 20:54

Re: DIY fiddle

Postby BigMan » 26 Feb 2015, 16:52

That fiddle looks great. Thanks for this info.
BigMan
*
 
Posts: 38
Joined: 20 Jun 2013, 12:40

Re: DIY fiddle

Postby mrbob13 » 13 Mar 2015, 02:11

The files are CAD files i think. that's why you are having trouble viewing them
mrbob13
*
 
Posts: 39
Joined: 08 Dec 2007, 02:15

Re: DIY fiddle

Postby mrbob13 » 14 Apr 2015, 00:12

Question about this. do you think this would be possible via casting with aluminum? youtube is great, just look up diy aluminum casting. looks simple enough, all things considered.

I think if you made Styrofoam pieces and cast them this might work. any ideas?
mrbob13
*
 
Posts: 39
Joined: 08 Dec 2007, 02:15

Re: DIY fiddle

Postby Sir Cumference » 14 Apr 2015, 17:14

It could be done as a lost foam casting.

But where laser cuttings are within tenths or hundredths of a millimeter, diy castings typically are in the millimeter range of error and roughness.
It will need quite a bit of finishing after casting.
~ Leatherworking, blacksmithing , woodworking and programming are the most pervertable skills you can learn! ~
User avatar
Sir Cumference
Moderator
 
Posts: 1544
Joined: 29 Jan 2012, 21:00
Location: Scandinavia

Re: DIY fiddle

Postby mcswitchy » 11 Jan 2018, 08:12

Thank you very much for sharing, @Schnecke! I have access to a laser cutter and look forward to trying out your design.
mcswitchy
*
 
Posts: 1
Joined: 15 Sep 2015, 02:48

Re: DIY fiddle

Postby mrbob13 » 18 Apr 2018, 15:51

Any chance you know were to find the plans to make the rigid stocks? i have been trying to buy them for months and i cant find any sellers.
mrbob13
*
 
Posts: 39
Joined: 08 Dec 2007, 02:15

Re: DIY fiddle

Postby ling87 » 13 Apr 2019, 18:09

I tried to create a fiddle which can be build on a 3D-Printer. All parts are small enough and are mounted with screws together ... printing coming soon.
Attachments
g3.JPG
Fiddle 3
g2.JPG
Fiddle 2
g1.JPG
Fiddle 1
ling87
*
 
Posts: 1
Joined: 13 Apr 2019, 18:05

Re: DIY fiddle

Postby Shannon SteelSlave » 13 Apr 2019, 23:01

Welcome to Bound Anna, Ling! How much would that cost to print? I can't wait to see what else you can print.
Bondage is like a foreign film without subtitles. Only through sharing and practice can we hope to understand.
A Jedi uses bondage for knowledge and defense, never for attack.
I am so smart! I am so smart! S-M-R-T!....I, I mean S-M-A-R-T!
User avatar
Shannon SteelSlave
***
 
Posts: 260
Joined: 03 Feb 2019, 18:49
Location: New England, USA

Previous

Return to DIY

Who is online

Users browsing this forum: No registered users and 2 guests