New project: web-control box

Ideas and instructions how you can make your own bondage toys.

Re: New project: web-control box

Postby occorics » 12 Feb 2018, 09:57

sbdx wrote:Very nice work!

Would you be willing to share the details of how you are using the Raspberry Pi to control the motor on your F-machine? This is something I've wanted to do for awhile, but am not quite sure how to go about it.

I would appreciate any help you might be willing to offer!


I'm using a PWM controller board (DROK 200085). Instead of the potentiometer, I use a chip with an analogue output (PCF8591) to provide the 0-5V control voltage. It's connected to the I2C pins of the RaspberryPi.
On the PCF8591, there are no external parts needed, just connect the unused inputs to ground. Programming it is done by sending two bytes, one to enable the output (01000000 (the other bits are for controlling the inputs)) and one to control the output voltage.
maid marta, Collared property of Shelle Rivers
--- https://twitter.com/ShellesPuppy --- https://owned-by-princess-shelle.blogspot.com ---
User avatar
occorics
**
 
Posts: 195
Joined: 31 May 2016, 10:46
Location: Germany

Re: New project: web-control box

Postby sbdx » 13 Feb 2018, 01:36

That was the sound of the light bulb coming on. Makes perfect sense, thank you!
sbdx
*
 
Posts: 10
Joined: 07 Jul 2012, 22:26

Previous

Return to DIY

Who is online

Users browsing this forum: No registered users and 3 guests