www.BoundAnna.com

If you want one more point of restriction/excitement you can cut the pipe in half and insert a T or a cross fitting in the middle, also 1 1/2 inch, then cement it back together. It might be a bit snug for some guys, but for most of us that's just about the right size to insert and capture your favor...

A few years ago I purchased a few very old versions of a similar product described at http://forum.boundanna.net/board/viewtopic.php?f=7&t=670&p=5715#p5715 They're made of heavy cotton canvas and perform very much like the new posey version, but are not in anything resembling new condition. ...

If you look at the photo behind the center of the hook you can see it holding a cordless drill -- that gives an overall idea of size. The ball is only about 3/4 of an inch diameter, solid plastic -- goes in easily but won't fall out with just gravity. The long end has a belt loop for hooking it over...

Our friends at Husky Tools have done it again. I found this tool hook with a ball on the end that works quite well right out of the package. You might have to widen it just a bit depending on your body shape.

Here's a new attachment point and release method I used on a recent road trip. http://img32.imageshack.us/img32/9885/bar1labelss.jpg Support a wooden dowel across a doorway about 3 feet high using a string tied tightly to one end (B) and supported from a door hinge. Support the other end of the dowe...

Using a sinking sandpit up to your neck would be fatal. Many construction workers who get trapped just up to their waist in a collapsing trench die of their injuries fairly quickly. The dirt puts so much pressure on their legs that the blood gets squeezed out and up into their torso, increasing thei...

I think I would avoid plastic hooks, as they can break if stressed too much, possibly leaving pieces inside you with sharp edges poking tender parts.

A quick and easy way to achieve this, though with less suction than other methods, is with a $2 snake bite kit. It has two stiff rubber halves that placed over the nipple, squeezed and released produce a satisfying suction for at least a few minutes. If you fill them with water before placing them, ...

I built a sound activated e-stim device for a total of about $10. I started with a sound activated dancing palm tree for $6 at a popular electronics store -- pretty much any sound activated device would work. I then took the output that normally moves the tree and routed it to a 1-amp transistor tha...

Try gluing some sand to your hands. You might also try locking some rough leather gloves onto your hands using something like zip ties.

This was a typical example of how the brain turns off during the heat of passion, even if I was the only one present. I had designed a scenario where there was some tension from a rope around my balls, but I wanted to make it a little more interesting, so changed it in mid-stream without proper plan...

I found a digital light timer at the hardware store for about $20 that allows you to set up to 70 on/off cycles at whatever times and durations you want from one minute to 7 days. I programmed it to wait 10 minutes, come on for 1 minute, wait 7 minutes, come on for 3 minutes, etc until I had about 5...

To secure it to the top end of the dowel I used one of those double ended screws -- wood threads on one end and machine threads on the other. They're used to attach table legs to tables. I must also admit, contrary to popular wisdom on this site, that the dildo was one I custom made out of maple woo...

A male friend of mine used a tampon for a butt plug, and it swelled up so much after absorbing all the moisture in his anus that he almost couldn't get it out. It actually caused bleeding on the way out because he had to pull so hard against soft anal tissue.

Thank you -- that worked perfectly. Who knew that "j" meant day of the month and "D" meant day of the week.