www.BoundAnna.com

There was no contradiction. Ac motors will run off the dc supply , but will only run in one direction. The reason for using this motor was the extreme torque it could deliver even at low voltages. They normally run off 240v ac.(oh - plus it was free!!) There was no need to know where the motor was a...

Unfortunately i don't think the h bridge will work for me. I think it needs a dc motor - the one from the washing machine is ac (so whatever supply you give the motor - it only goes one way)

Sure , hercules1946 , if you need any further pics or help , just pm me and i'll see what i can do.

Here's the basic schematic : http://i889.photobucket.com/albums/ac100/whippingboy/gadgets/P1010177.jpg I drove it from a pic microcontroller but a PC would work as well. The power is varied by varying the duty cycle to the BDX33. So a logic 1 contantly on is full power. A stream of 1's and 0's with ...

I made the motor go back and forth much the same way the washing machine did. There are four wires from the motor, two from the motor brushes and two from the field windings. By reversing the two from the brushes through a relay can make the motor go backwards. I drove the motor forwards about 1/2 s...

I have longed to have some kind of spanking machine i could use while in self bondage. Whilst playing around with a washing machine motor it occurred to me it would make the ideal basis for one. With a small amount of junk and a £15 power supply i finally have used it for the first time. http://i889...

Here's the basic device : http://i889.photobucket.com/albums/ac100/whippingboy/P9230094.jpg and this is a simple circuit for it: http://i889.photobucket.com/albums/ac100/whippingboy/P9230095.jpg though i went for a more elaborate control with a computer controller and some other sensors. Hope this h...

I just thought i would share the details of my latest SB locking device. I tried to create something that was (a) Easy to lock (b) Easy to unlock (c) had a fail safe built in. What i came up with was the following. Wooden post 100mm square with a 15mm hole drilled through it. My post was bolted vert...

I do not see something like this in Slovakia yet. May be the air pump will make the simmilar function. Thank you for your advice ;-) selfb Why use a pump? . Just run a tube from your mouth to the container which is hanging from your nipples. Then you have to suck your fresh urine up the tube to rel...

I was curious enough to register just to ask... What kind of sensors were used? a conductive pad of some sort? The sensors were infra red ones which would trigger when an object (myself) came into view. The distance at which they trigger can be adjusted from almost touching to up to 200mm away. The...

I was quite happy with the reliability, the worse thing that could have happened was a power cut. If that happened the circuit would release me on power on again. (or i could use the escape route and spill ink on the floor) The only thing i would like to change is the lock , so both hands are releas...

With everything ready i began. Firstly i got naked and then put on a pair of thigh length boots. A tight corset was followed up by an all over leather mask. I then put on two leather ankle cuffs and two wrist cuffs. I lubed up the dildo and set the counter to 200. (200 times up and down the dildo to...

I had been planning this one for a while , but last week finally got all the equipment together and gave it a go. I started with a large block of wood joined to another at the top so it formed a T on the ground. At the bottom of the 'T' i fixed a solenoid which could hold my hands until an electric ...