www.BoundAnna.com

Another interesting device ...still using your last one.

Can you explain what the 3"od, 1.5in Id rubber is for ? I'm thinking its the 'bearing' for the 1.5in pipe ? where did you get it pls ?

Do you inject it hot/warm or wait till the mixture cools when I assume its thicker ?

ok, I think I maybe had the absorbing material wrapped too tight and the condom didnt rip either. It took about 20-30mins for 2qts to flow with 4-5ft of height so I'd expected it would be quicker or do you think thats what I should expect ? I'll try snipping the end of the condom too....I'm only sma...

Thanks for sharing this. I tried it out and found it works well although the string I used to get the donut shape came loose so I need to sew/tie it better. It seems to take quite a while for the water to flow and be absorbed. How long would you expect 2qts to take before its all inside and absorbed...

Hi,

Yes, thats exactly what I need. I'll create a 'ready.exe' file and let you know how it works out.

All the ice cream you want...just let me know

I missed your presentation post :facepalm: Did you get your project with the 312 working? Greets from Barcelona Hi, Yes I was able to give it all a trial run last weekend and am going to write about it. Now of course I have more ideas :-). One thing I wanted to ask you was how easy would it be to a...

I too am in SW florida and enjoy bondage very much. I am currently interested in making new friends that enjoy bondage and would appreciate it if you would be interested in some online chats Hi, That sounds great. I am near Port Charlotte so hopefully you are close by :-)...pls send me a PM and we ...

Hi, ah, ok that was just me being lazy , I'd just commented out the function call. This is my final code for servo A #include 'CommMG.au3' #include <Misc.au3> _Singleton("PAIN") ;this instruction will not let to be pain.exe running at the same time ;Internal for the Serial UDF Global $spor...

6am...thats a punishment :-) I only run the start.exe once to make sure the servo is at zero degrees before I start the session. After that I just use your motion detector program with Pain3.exe. So each time it detects me move it advances the servo a little more until it gets to the maxteasepositio...

Ok, I think I have it working ! I run the "start.exe" to set the servo to the zero position. The run "pain3.exe" each time the tease is triggered. The step size and maximum angle is set in the .ini file. #include 'CommMG.au3' #include <Misc.au3> _Singleton("PAIN") ;this...

Thank you for the Autoit code. I think I need to do some study on Autoit 1st so I can better understand the syntax before I attempt any code :-). I can see that making the changes in the .exe would be more flexible but I find the Arduino code a little easier as I am more familiar with it. I wont get...

Ok, thank you. I got your 'include' files and was able to compile the code :-)...Once I worked out the servo 1 is now on pin 8 it all worked fine and I can change the start & stop positions as well as the 'sleep' time from the ini file. What I want to happen is starting at 0 deg (servo start) ea...

Thanks for the code and explanation. I probably need to explain a little better what I am trying to do as its not quite the same. My servo is mechanically connected to the Ch A on my 312 so when the servo turns it increases the output of the 312. What I want to do is use the motion detector to detec...

Wow...thank you for all the suggestions :-) Controlled incremental change... Sounds like what you are after is a stepper motor... Some steppers can single-step 1 degree at a time... Some even less... Second: Is the servo directly connected to the ChA knob (I guess) Then try a pulley arrangement, sma...

I'm been using "pain.exe" and the motion detection to drive a servo. The servo is connected to ChA of my 312 so that each time I get teased the servo turns up the 312 ChA. However, the 180 deg is too much of an increase so I have modified the Arduino code to limit the travel to about 20deg...

Hi all, I recently moved to SW Florida and would be interested to hear of others local to me. I have enjoyed bondage for many years and now find that selfbondage is often my preferred method. I am expecially interested in many of the software methods and love the code written by Qwerty212, LoKit and...